Installation Instructions:

0) Install Cura 2.3

[ https://ultimaker.com/en/products/cura-software/list ]
[ https://ultimaker.com/en/products/cura- ... equest/120 ]
1) Run Cura
2) Goto configuration directory

[ Cura -> "Help" menu -> "Show Configuration Folder" submenu ]
3) Quit Cura
4) copy "makergear_m2e.def.json" file into "Extruders" directory
5) Run Cura
6) Add MakerGear M2 printer

[ Cura -> "Settings" menu -> "Manage Printers" submenu -> "Add" button - open other - select "MakerGear M2e" ]

Change or Update Instructions:

NOTE: NEVER modify or replace "makergear_m2e.def.json" file while Cura is running.
1) Run Cura
2) Delete M2 printer

[ Cura -> "Settings" menu -> "Manage Printers" submenu -> "remove" button - select "MakerGear M2e" ]
( Note: Cura behaves oddly if the printer is not removed before making changes to it )
3) Quit Cura
4) [ MAKE CHANGES (replace "makergear_m2e.def.json" file or edit "makergear_m2e.def.json" file) ]
5) Run Cura
6) Add MakerGear M2 printer

[ Cura -> "Settings" menu -> "Manage Printers" submenu -> "Add" button - open other - select "MakerGear M2e" ]