Search found 895 matches

by sthone
Tue Apr 20, 2021 2:11 am
Forum: General Discussion
Topic: Heatbreak Barrel Material
Replies: 3
Views: 61

Re: Heatbreak Barrel Material

Once upon a time they did have both a PTFE and an all metal version V4. When the Duel Kits came out I think they came with one each. The best thing to do would just be to drop MG a email or phone call to see if they still have them available if you want one.

-Steve
by sthone
Sun Mar 21, 2021 3:29 am
Forum: General Discussion
Topic: M2 upgraded to rev G (?) and requires new belt clamp
Replies: 3
Views: 542

Re: M2 upgraded to rev G (?) and requires new belt clamp

I haven't keep up with all the revisions but you can try this one for the Rev E.

https://github.com/MakerGear/M2/blob/ma ... 0Clamp.stl

If not all the part files can be found here

https://github.com/MakerGear
by sthone
Fri Aug 21, 2020 9:33 pm
Forum: Modifications
Topic: Help with the fans
Replies: 2
Views: 1288

Re: Help with the fans

Fan-1.jpg
Fan-2.jpg
These are really old but might get you heading in the right direction.
by sthone
Mon Apr 20, 2020 1:51 am
Forum: Tech Support
Topic: M2 Level Help
Replies: 8
Views: 5661

Re: M2 Level Help

Where do yall even find the quick start software?
https://www.makergear.com/pages/get-started
by sthone
Thu Apr 09, 2020 3:31 pm
Forum: Tech Support
Topic: M2 Level Help
Replies: 8
Views: 5661

Re: M2 Level Help

I'm probably late to the party here but.... Don't take this the wrong way but your frustration is all operator error. It sounds/looks like you have an older model M2 so there's no way you should be using the quick start software. You're trying to use software on a machine it wasn't designed for so t...
by sthone
Wed Jan 22, 2020 3:23 am
Forum: Tech Support
Topic: Did I botch something and if so how bad?
Replies: 4
Views: 2812

Re: Did I botch something and if so how bad?

Untitled-1.jpg
The Red circle is where you set the temp. and the blue circle is where you would extrude 100mm of filament once the temp is anywhere above 170.
by sthone
Thu Jan 16, 2020 7:27 pm
Forum: Tech Support
Topic: Has anyone changed the fan in their power supply?
Replies: 24
Views: 22154

Re: Has anyone changed the fan in their power supply?

I can't help you with the specs but I've had the Noctura's in all 3 of my power supplies and I've never had an issue.... well I have to assume they are running because they sure can't be heard.
by sthone
Sun Dec 29, 2019 7:13 pm
Forum: Tech Support
Topic: Remap extruder pins
Replies: 6
Views: 2898

Re: Remap extruder pins

I'm no expert but I think if you plug it into the other port you just need to tell your slicer to use tool 2 instead of tool 1 from now on. I wouldn't think you need to rewrite the firmware.
by sthone
Wed Dec 11, 2019 1:51 pm
Forum: Tech Support
Topic: Petg extruding problems
Replies: 13
Views: 5554

Re: Petg extruding problems

So the whole blow torch method I’ve never tried kinda confused about. Do I just heat the shit out of it and call it good with the blow torch? Was going to go back to play and see if I have the same problem Basically yeah... you take the nozzle off and just heat it up to burn out any crap that is in...
by sthone
Tue Dec 10, 2019 1:57 pm
Forum: M3-ID
Topic: Octoprint module SD card access?
Replies: 12
Views: 5898

Re: Octoprint module SD card access?

The SD card is in the Raspberry Pi. (I assume they are using Pi's) The Pi is housed in the smaller box on the base of the printer. (the one on the left) You would need to remove the SD card from the PI and then follow this tutorial to copy it. https://www.howtogeek.com/341944/how-to-clone-your-raspb...