Search found 5 matches

by whoDat
Tue May 05, 2020 5:52 am
Forum: Modifications
Topic: How is the M3 wired to the Raspberry PI?
Replies: 2
Views: 2029

Re: How is the M3 wired to the Raspberry PI?

It's connected via serial port connection ( /dev/ttyS0 ). You can see this in the Octoprint settings under the "Serial Connection" section. The rx/tx pins for this are on the GPIO header of the Raspberry Pi.

http://www.anintegratedworld.com/wp-con ... 08/pin.jpg

wh0dat
by whoDat
Tue Mar 28, 2017 5:56 pm
Forum: How-to/Guides/Tips
Topic: How To - Pausing a print at a specific layer. (Simplify3D)
Replies: 36
Views: 48018

Re: How To - Pausing a print at a specific layer. (Simplify3

Will have to try this method... I've always used the 'Stop/Start printing at height' settings in the advanced tab of Simplify3D. What I didn't like about this method : 1. This completely stops the print, does not just pause it. So must manually restart at a certain height and remove the gcode starti...
by whoDat
Fri Jan 15, 2016 5:24 pm
Forum: Tech Support
Topic: Stops at random points in the middle of the print
Replies: 48
Views: 15726

Re: Stops at random points in the middle of the print

I've tried printing with the USB cable completely disconnected (used the LCD to start the print) and still having the same issue. It's also doing it much more frequently now. Going to try logging with verbose on to see if there are any issues showing up in the log. It just stops, all motors still lo...
by whoDat
Thu Jan 14, 2016 4:33 pm
Forum: Tech Support
Topic: Stops at random points in the middle of the print
Replies: 48
Views: 15726

Stops at random points in the middle of the print

Recently my M2 likes to stop in the middle of a print, at seemingly random points. The whole thing just stops, all motors. The printer is still 'On' ... all fans are running and the LCD is on. I try to re-start it by having it start at the layer it left off on (Simplify3D lets you start at a certain...
by whoDat
Tue Apr 29, 2014 4:35 pm
Forum: Model / Object Sharing
Topic: m2 electronics box
Replies: 9
Views: 7344

Re: m2 electronics box

Really nice job - I especially like the locking bar at the back. If you ever feel yourself lacking for things to do, I would love to see a modified version for the Vikki LCD like this http://www.thingiverse.com/make:45521 I know obviously that's a case that's already done like that, but your box is...