Search found 57 matches
- Tue May 26, 2015 4:52 am
- Forum: General Discussion
- Topic: Another filament welder
- Replies: 4
- Views: 6002
Re: Another filament welder
and that's called "easy"? I would keep changing it myself with retraction/extrusion procedure
- Tue May 26, 2015 4:02 am
- Forum: Tech Support
- Topic: No infill between object walls
- Replies: 3
- Views: 5027
No infill between object walls
Hi, When I print stl there is no infill between walls and as you can see o the photo it comes out as 2 separated walls when it has to be solid one. There is no any separation in STL and S3D when I open it there, also I print with 100% infill and still it comes out separated. It happened with me befo...
- Fri May 01, 2015 1:34 pm
- Forum: Tech Support
- Topic: Print Quality Help
- Replies: 8
- Views: 11367
Re: Print Quality Help
Thank you! Your suggestions significantly improved print quality!ednisley wrote:I'd start by increasing the Coasting Distance, then reducing Retraction Distance: change one thing at a time and measure the results!nokianich wrote:I didn't want to start a new thread.
- Thu Apr 30, 2015 1:02 pm
- Forum: Tech Support
- Topic: Print Quality Help
- Replies: 8
- Views: 11367
Re: Print Quality Help
Hello everyone. I didn't want to start a new thread. Can anybody tell me pls what causes this? I also included my settings. Print with ABS, 245 degrees, heated bed. 0.35 nozzle
- Sat Mar 14, 2015 5:33 am
- Forum: Tech Support
- Topic: V4 extruding issue
- Replies: 19
- Views: 21742
Re: V4 extruding issue
I actually have the same issue with V3B too, I just installed a new nozzle and getting the same problem... I afraid it is Rambo, some problems with heating. Found out one pattern. If it heats up from room temperature it extrudes much more, can even let to print first layer and then gets stuck, but i...
- Fri Mar 13, 2015 7:43 pm
- Forum: Tech Support
- Topic: V4 extruding issue
- Replies: 19
- Views: 21742
Re: V4 extruding issue
will do it tonight when get home. I already disassembled it 2 days ago, was trying to switch V3B nozzle with nozzle from V4
- Fri Mar 13, 2015 5:18 pm
- Forum: Tech Support
- Topic: V4 extruding issue
- Replies: 19
- Views: 21742
Re: V4 extruding issue
Have you popped the nozzle off the V4 yet and looked around? Might be something clogging the nozzle ( http://2.bp.blogspot.com/-fUqAk76r7fY/T-CaPRj6sHI/AAAAAAAABeA/pBW3ixG4csc/s1600/ball_3.jpg ), char, dust, etc. Take the nozzle off and try extruding through the giant fat hole that the nozzle threa...
- Fri Mar 13, 2015 3:44 am
- Forum: Tech Support
- Topic: V4 extruding issue
- Replies: 19
- Views: 21742
Re: V4 extruding issue
PcS wrote: Just wondered as too low a temp could cause that .
I even installed temp sensor from my V3B, raised temp up to 255 - no luck
- Fri Mar 13, 2015 3:26 am
- Forum: Tech Support
- Topic: V4 extruding issue
- Replies: 19
- Views: 21742
Re: V4 extruding issue
245, as alwaysPcS wrote:what is your temp for extruder ?
- Thu Mar 12, 2015 2:16 pm
- Forum: Tech Support
- Topic: Clogged Hot-end
- Replies: 12
- Views: 14262
Re: Clogged Hot-end
and most interested part is it didn't crack right away it did print 4 solid 5" by 6" layers first