Does anyone have experience and advice for using the PF filament? I do have the recommended mat for adhesion. I have an M2 with a V4 upgrade Using Simplify 3d I'm going to be printing these small parts. The actual printing will be from separate stl files which I continue to modify in small ways I ha...

So I printed this piece. It took 30 hours. I was going to use it but I find that I need to reprint with slight changes As you can see from the photos it had some problems that I would like to disappear I'm printing with Hatchbox PLA with a raft and support on a painters tape bed, to which it was wel...

Thanks fellas. It was really stuck down and believe me I know what lifted parts look like ;) I pretty much stopped printing for quite a while out of lift frustration. I'm gonna go with the ed solution on this but I'll definitely be watching for the lifting part as well. And now that I know what the ...

About 1/8" into this print everything shifted to 1 side by about 1/16 I have the machine running on a UPS so power glitch is not the issue. The ABS part was VERY well adhered to the blue tape Any Thoughts or suggestions besides just trying again? This was a first prototype so I will be modifying and...

More info there is a barcode in the front corner of the RAMBO
10011135p

I just got it and got it all wired in then I look at the firmware instructions --- To use the LCD panel with M2, a newer version of the Marlin firmware is required, that has support for I2C LCD panels. Download Marlin for M2 with LCD panel, and unzip it. Marlin for M2 with LCD panel and x8 microstep...

No PC, running off SD card so I should have at least 5 min even with HBP.
That will have to do for now.
It will cover most glitches and generally smooth out the power.

Thanks for your help.

I live in one of the lightning capitols, Tampa. I had a 12 hr print going and at 10 hours the power kicked off I am going to get a UPS for future problems. UPS calculator tells me that an APC 600 will keep me running for 20 minutes at 100 watts or 10 minutes at 200 watts Most of my power outages are...