I had the same problem awhile ago on my newest press about a month after firing it up. After some back and forth with MG support we figured out the gear that drives the planetary gears wasn't properly fastened to the main shaft so the gear... while it still turned would slip down the shaft and no l...

the one inside the gear box i just glued it and printed with it but that would be the second time my main issue right now is the overheating of the extruder motor

Hi , I have a some problems with me extruder motor 1- The inner gear is not attach any more so the motor turns and nothing happens 2- the motor heats up so high while in prints i glued the inner gear which worked for couple a days but after that it just became lose again due to heat issues i guess

Thank you for your replies
will run the calibration process and report back after prints
Last question what is the FFF file

Hi , this is my first print after adjusting the printer and ruinnig through some settings and setups from adjusting z plane ,beding and first layer issues. so i would like to know what further adjusments i could do to over come these defects on this prints also this prints the nozzle got glocked or ...