Hello, I am trying to print a structure with a large flat overhang. I am having a lot of trouble getting the support material to break away from the part after the print. Here are my current settings. Support infill percentage = 30%; Dense support layers = 3; Dense infill percentage = 100%; Print su...

No, They don't show in the print preview. Infact, lines that should be correct appear in the preview

Last night I cleaned out the hot end really well. Turned the temp down to 240 (abs), slowed the print speed to 1800 mm/min, increased the infill overlap to 40% Made sure everything was level and that the first layer was correct, and printed a zero infill cube to dial in a extrusion multiplier around...

Extremely Stringy Top and Bottom Layers! After first getting the Makergear m2 a few weeks ago I leveled the bed with a dial indicator and performed various calibrations to achieve a nice cube shown here. I was off and printing various items. One night, I had a particularly large print that misprinte...