Search found 17 matches

by goopyplastic
Mon Apr 16, 2018 7:56 am
Forum: Modifications
Topic: Mini-Rambo "EINSY"
Replies: 11
Views: 5514

Re: Mini-Rambo "EINSY"

I realize this is pretty late to reply, but just wanted to say you can use psu voltage fans with the einsy. You just only connect the GND of the fan connector, then wire the + lead to either the logic or heater + screw terminal. You can also step down the 24v to say 12v with something like a traco t...
by goopyplastic
Wed Jan 27, 2016 10:15 pm
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

Anyone using the new metal motor mount plus auto leveling sensor?
by goopyplastic
Tue Oct 13, 2015 4:26 pm
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

I noticed some weird behavior on my machine. It will auto probe, then while printing the nozzle will go off randomly to different spots on the bed far away from the print somewhat slowly, then it drifts back to where it started and keep on printing. It will keep do this randomly it's pretty bizarre...
by goopyplastic
Tue Oct 13, 2015 7:52 am
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

I noticed some weird behavior on my machine. It will auto probe, then while printing the nozzle will go off randomly to different spots on the bed far away from the print somewhat slowly, then it drifts back to where it started and keep on printing. It will keep do this randomly it's pretty bizarre....
by goopyplastic
Mon Sep 21, 2015 5:06 am
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

Got it all going, v3b, probing, 20x4 lcd yay happy dance.
by goopyplastic
Fri Sep 18, 2015 5:16 pm
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

Not sure that the normal heat spreader or regular / thinner aluminum will work out as it will tend to deform with heat etc but maybe the leveling will overcome that. I am curious with trying to get 1.0.2 working with the normal 20x4 smartlcd (non glcd) to reduce the lcd overhead more, not having muc...
by goopyplastic
Mon Sep 14, 2015 11:22 pm
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

Does shimming the spider and removing the springs help with the deflection of the bed during printing? The mic6 bed has much more heft and I noticed that it moves up and down more than the boro at the edges while printing. I have just dialed down the print speed a bit to compensate... open to sugges...
by goopyplastic
Mon Sep 14, 2015 3:46 am
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

Are you using rambolcd adaptor?
I have plenty of those and lcd's so your firmware would still interest me :D
by goopyplastic
Sun Sep 13, 2015 10:59 pm
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

PcS wrote:5v worked for me as well. 24v seems to be more accurate though. Glad the firmware worked !!! :-)
Are you using an lcd? do you have a version of the firmware cooked for that? Thanks!
by goopyplastic
Sun Sep 13, 2015 7:40 am
Forum: Modifications
Topic: M2 Auto-Leveling Kit (Beta)
Replies: 203
Views: 36491

Re: M2 Auto-Leveling Kit (Beta)

Couple things I noticed getting this going tonight. - Josh's firmware didn't work for me, PCS's did. - v3b folks are going to want to add 9mm of probe offset in the firmware - with the extra weight of the mic6 bed, have a g1 z190 in your end gcode is probably a good idea ... that heavy bed sure does...