Search found 116 matches
- Thu May 06, 2021 9:53 pm
- Forum: Tech Support
- Topic: Z offset problem
- Replies: 0
- Views: 68803
Z offset problem
Hi . I have a M2 V4 printer with BLtouch sensor for some time i have a problem with the Z offset . I use the M851 command to set the offset store it using M500 and recall it with M501 . first print is ok but for some reason suddenly the next or maybe the follow one the print is fucked up and the ext...
- Sat Mar 13, 2021 2:32 pm
- Forum: Modifications
- Topic: BLTouch Auto Leveling Sensor
- Replies: 63
- Views: 239345
Re: BLTouch Auto Leveling Sensor
Ok Found a way to measure it
- Fri Mar 12, 2021 3:43 pm
- Forum: Modifications
- Topic: BLTouch Auto Leveling Sensor
- Replies: 63
- Views: 239345
Re: BLTouch Auto Leveling Sensor
Hi
I install the BLTOUCH and it pass the test OK what I don 't find is how much the tip of the device should be above the end of the extruder when the tip is in pullup position (using the spring to adjust it )
Regards Doron
I install the BLTOUCH and it pass the test OK what I don 't find is how much the tip of the device should be above the end of the extruder when the tip is in pullup position (using the spring to adjust it )
Regards Doron
- Mon Dec 14, 2020 2:58 pm
- Forum: Tech Support
- Topic: Power to heated bed M2
- Replies: 3
- Views: 8447
Re: Power to heated bed M2 (problem solved )
Hi
the problem was the HBP thermistor .(good i have other one ) i suppose that when the MF feels problem in the thermistor it does not turn on the power to the HBP
Doron
the problem was the HBP thermistor .(good i have other one ) i suppose that when the MF feels problem in the thermistor it does not turn on the power to the HBP
Doron
- Sat Dec 12, 2020 11:53 pm
- Forum: Tech Support
- Topic: Power to heated bed M2
- Replies: 3
- Views: 8447
Re: Power to heated bed M2
Hi
When it disconnect the 2 pin TB from the board and check directly on the pins of Arduino board I don't have 24v so I have a different problem
Thanks for try to help
Doron
When it disconnect the 2 pin TB from the board and check directly on the pins of Arduino board I don't have 24v so I have a different problem
Thanks for try to help
Doron
- Sat Dec 12, 2020 4:30 pm
- Forum: Tech Support
- Topic: Power to heated bed M2
- Replies: 3
- Views: 8447
Power to heated bed M2
Hi Saturday nice day so I turn on my M2 printer . Heated bed temp=0 . Check wires OK . Check PS output 3 output =24v . Check on the Arduino TB no power on HBP connector .Try Power UP again the some result . Heater and Fan board connectors got 24v .try to check 3 fuses they are fine . Try to unplug t...
- Fri Oct 30, 2020 3:59 pm
- Forum: Tech Support
- Topic: Strange Z motor move
- Replies: 6
- Views: 12271
Re: Strange Z motor move
OK found the parameter I think it is the last one .Correct me if I am wrong
Thanks for help Doron
Thanks for help Doron
- Fri Oct 30, 2020 3:32 pm
- Forum: Tech Support
- Topic: Strange Z motor move
- Replies: 6
- Views: 12271
Re: Strange Z motor move
Hi Download the FW from MG site .Found the key in Configuration_adv.h [code]/[size=150]/ Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) #define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ...
- Fri Oct 30, 2020 1:27 pm
- Forum: Tech Support
- Topic: Strange Z motor move
- Replies: 6
- Views: 12271
Re: Strange Z motor move
The original engine was silver not black
- Fri Oct 30, 2020 1:26 pm
- Forum: Tech Support
- Topic: Strange Z motor move
- Replies: 6
- Views: 12271
Re: Strange Z motor move
Hi May be that i am using a MIC6 aluminum plate that I got from Insta is to much heavy for the motor.When I try to move the bed without it the bed stops at the Z home ? ( the new motor that I use now instead the black original one is Redrex 310mm T8x8 Lead Screw Integrated with Nema 17 Stepper Motor...