Search found 192 matches

by Pekish79
Fri Mar 15, 2019 9:33 pm
Forum: General Discussion
Topic: Glass Pop
Replies: 4
Views: 301

Re: Glass Pop

there was a guide about printing PETG here somewhere and it warned to give more space for first layer as it is very sticky
by Pekish79
Thu Mar 14, 2019 7:17 pm
Forum: General Discussion
Topic: .25 Stainless nozzle?
Replies: 20
Views: 1074

Re: .25 Stainless nozzle?

glass or transparent material I would use DLP/LCD printer I used to do it all with FDM and I made some semi-transparent windows type but I was never really happy with it.

But ultimately i don't feel the need to put a glass unless is frosted transparent glass is fine to just leave the hole
by Pekish79
Wed Mar 13, 2019 5:44 pm
Forum: General Discussion
Topic: .25 Stainless nozzle?
Replies: 20
Views: 1074

Re: .25 Stainless nozzle?

it's funny as DLP is so different then FDM so what matter is how "tall" the object is not how large so u can print 4 car in the same time as 1 if they are next to each other but you have to print it with a slight angle I would say 4 hours at 0.05 and 10 hours at 0.02 (i tried to print at 0.02 and ma...
by Pekish79
Tue Mar 12, 2019 7:48 pm
Forum: General Discussion
Topic: .25 Stainless nozzle?
Replies: 20
Views: 1074

Re: .25 Stainless nozzle?

I wouldn't sleep next to mine but unless you are allergic or very sensitive some of the new and slightly more expensive resin are odorless (almost) the price of a machine is between 400$-500$ it's not cheap but absolutely affordable Added the second car and some detail I think printing a mix of the ...
by Pekish79
Mon Mar 11, 2019 9:22 pm
Forum: General Discussion
Topic: .25 Stainless nozzle?
Replies: 20
Views: 1074

Re: .25 Stainless nozzle?

I apologize for my English I just assure you that 0.25 is not a good nozzle if you need to go that small maybe you need to get a DLP machine (they have a very small print area, but if you feel the need to go 0.25 probably you are printing very small objects!) This is my latest model, and all floor a...
by Pekish79
Mon Mar 04, 2019 7:30 am
Forum: General Discussion
Topic: .25 Stainless nozzle?
Replies: 20
Views: 1074

Re: .25 Stainless nozzle?

problem is that people just think as the universe end with themselves. the fact that your specific use is ok with .25 doesn't make it a reasonable nozzle if you printed a lot and not only that thing you will know that nozzle clog that the smaller the easier to clog and mass producing something like ...
by Pekish79
Wed Feb 27, 2019 6:13 pm
Forum: General Discussion
Topic: .25 Stainless nozzle?
Replies: 20
Views: 1074

Re: .25 Stainless nozzle?

it's harder to print harder to level it would probably get clogged easily and people would complain (as they always do) with the manufacture of the nozzle or the machine itself instead of understanding the limitation of the personal small device vs more industrial machine. not only the time of the p...
by Pekish79
Wed Feb 14, 2018 10:34 pm
Forum: General Discussion
Topic: How much gantry curvature is too much?
Replies: 5
Views: 2548

Re: How much gantry curvature is too much?

I have the Mic6 the Zebraplate the normal glass with yellow tape and the glass+pei

honestly, my favorite is the glass+pei I never found any advantage to use MIC6 only disadvantage so now it's sitting as a paperweight
by Pekish79
Mon Feb 05, 2018 6:47 pm
Forum: General Discussion
Topic: How much gantry curvature is too much?
Replies: 5
Views: 2548

Re: How much gantry curvature is too much?

I really don't bother much measuring the plate but I print 5 boxes 2cm x 2cm x 2mm (10 layer .2) then I measure if they are really 2mm usually I get a range between 1.89-2.04 (I try to squish them a little) so more o less I know there is a variance of 0.15mm overall. sometimes I am lucky and it goes...
by Pekish79
Fri Aug 25, 2017 12:13 am
Forum: Printed Object Showcase
Topic: New model
Replies: 4
Views: 2863

Re: New model

http://i.imgur.com/ulJ2IX9.jpg each floor is modeled with room easily assemblable no need of glue so u can open them the trick was to align shaft and elevator and make a little trip that holds them in place when stacked think about a Matryoshka doll the way it open http://i.imgur.com/GMxqSoz.jpg i ...