Search found 22 matches

by daveb
Tue Apr 10, 2018 5:14 am
Forum: Modifications
Topic: Power Tap - Where To ?
Replies: 4
Views: 7878

Re: Power Tap - Where To ?

Box looks nice, good job
by daveb
Thu Apr 05, 2018 1:49 am
Forum: Modifications
Topic: My dual extruder fan mod - cool or lame?
Replies: 6
Views: 11476

Re: My dual extruder fan mod - cool or lame?

20180324_221314.jpg
20180324_221305.jpg
20180324_221300.jpg
This has happened before.
by daveb
Wed Apr 04, 2018 2:41 am
Forum: Modifications
Topic: My dual extruder fan mod - cool or lame?
Replies: 6
Views: 11476

Re: My dual extruder fan mod - cool or lame?

Old Thread but wanted to share this with you. Had trouble with that nose (duct between the motors) breaking and trouble getting that screw in on the right. So I made some mods to the shroud. Also added lights. https://lh3.googleusercontent.com/1du747oaEtTX2r_RsNgP6v8SQE6HEBh61pEXL14bxsjkf2c6-vyDHqy6...
by daveb
Tue Mar 13, 2018 5:58 pm
Forum: Tech Support
Topic: Need some help please
Replies: 0
Views: 9943

Need some help please

Need a bit of help here. Was having trouble getting the frimware to remember the z-stop when using the quickstart app or g-code input. Now the thing wants to park the X and Y axis right over my plate hold down. I've used m206 x ** Y** then M501 to verify looks good, Then M500 to save it, it parks sa...
by daveb
Fri Dec 08, 2017 2:23 am
Forum: Tech Support
Topic: Red led on and buzzer noise?
Replies: 3
Views: 5892

Re: Red led on and buzzer noise?

Can someone point me in the right direction. Makergear doesn't know why either. There only suggestion is change my wire harness , or RAMBO board. This is the 4th board in 15 months. NOTHING changed from the time I unplugged it to clean until I re-plugged it in two weeks later. The "modified wiring" ...
by daveb
Sat Dec 02, 2017 8:59 pm
Forum: Tech Support
Topic: Red led on and buzzer noise?
Replies: 3
Views: 5892

Red led on and buzzer noise?

Had disconnected my printer a week ago to clean the desk and such. Only thing done to it in the last week dwas sliding it out of the way. I did clean the build plate and lift up the hot bed to see better to plug pwer back in. Then when I powered up last night it booted fine. Used the Makergear app t...
by daveb
Wed Aug 16, 2017 6:23 pm
Forum: Tech Support
Topic: Another question about homing all endstops
Replies: 1
Views: 3345

Another question about homing all endstops

Here we go with another question. May be obvious to you folks, but I can not remember. How to I reset all the Axis Home's? I was trying with the Quickstart app, but they didn't save. Tried with S3D and no luck. I know it's just something I am not seeing.
by daveb
Wed Aug 16, 2017 12:04 am
Forum: Tech Support
Topic: Need some help setting the Z-endstop
Replies: 2
Views: 4407

Re: Need some help setting the Z-endstop

Like on FB, you pointed me in the right direction. When I upgraded I made a change in the wiring harness adding RC connectors to some items. Yea the Zstop was one, and I had disconnected the Zstop one inside my wire loom. Thanks a bunch for he reply.
by daveb
Tue Aug 15, 2017 9:30 pm
Forum: Tech Support
Topic: Need some help setting the Z-endstop
Replies: 2
Views: 4407

Need some help setting the Z-endstop

Can anyone help me out with my Z-Stop? I have a M2D that was upgraded with Dual extruders, 4 point leveling and endstop to the bottom. It' has the silver and black motor.Now I'm finally trying to reset everything so I can start printing again. The Z direction moves correctly when using Jog controls....
by daveb
Mon Jul 03, 2017 2:29 am
Forum: Modifications
Topic: My overboard Enclosure
Replies: 2
Views: 5695

Re: My overboard Enclosure

That's strange, I can see them. I'll check thanks