Search found 22 matches
- Tue Apr 10, 2018 5:14 am
- Forum: Modifications
- Topic: Power Tap - Where To ?
- Replies: 4
- Views: 8281
Re: Power Tap - Where To ?
Box looks nice, good job
- Thu Apr 05, 2018 1:49 am
- Forum: Modifications
- Topic: My dual extruder fan mod - cool or lame?
- Replies: 6
- Views: 11955
Re: My dual extruder fan mod - cool or lame?
This has happened before.
- Wed Apr 04, 2018 2:41 am
- Forum: Modifications
- Topic: My dual extruder fan mod - cool or lame?
- Replies: 6
- Views: 11955
Re: My dual extruder fan mod - cool or lame?
Old Thread but wanted to share this with you. Had trouble with that nose (duct between the motors) breaking and trouble getting that screw in on the right. So I made some mods to the shroud. Also added lights. https://lh3.googleusercontent.com/1du747oaEtTX2r_RsNgP6v8SQE6HEBh61pEXL14bxsjkf2c6-vyDHqy6...
- Tue Mar 13, 2018 5:58 pm
- Forum: Tech Support
- Topic: Need some help please
- Replies: 0
- Views: 10152
Need some help please
Need a bit of help here. Was having trouble getting the frimware to remember the z-stop when using the quickstart app or g-code input. Now the thing wants to park the X and Y axis right over my plate hold down. I've used m206 x ** Y** then M501 to verify looks good, Then M500 to save it, it parks sa...
- Fri Dec 08, 2017 2:23 am
- Forum: Tech Support
- Topic: Red led on and buzzer noise?
- Replies: 3
- Views: 6007
Re: Red led on and buzzer noise?
Can someone point me in the right direction. Makergear doesn't know why either. There only suggestion is change my wire harness , or RAMBO board. This is the 4th board in 15 months. NOTHING changed from the time I unplugged it to clean until I re-plugged it in two weeks later. The "modified wiring" ...
- Sat Dec 02, 2017 8:59 pm
- Forum: Tech Support
- Topic: Red led on and buzzer noise?
- Replies: 3
- Views: 6007
Red led on and buzzer noise?
Had disconnected my printer a week ago to clean the desk and such. Only thing done to it in the last week dwas sliding it out of the way. I did clean the build plate and lift up the hot bed to see better to plug pwer back in. Then when I powered up last night it booted fine. Used the Makergear app t...
- Wed Aug 16, 2017 6:23 pm
- Forum: Tech Support
- Topic: Another question about homing all endstops
- Replies: 1
- Views: 3397
Another question about homing all endstops
Here we go with another question. May be obvious to you folks, but I can not remember. How to I reset all the Axis Home's? I was trying with the Quickstart app, but they didn't save. Tried with S3D and no luck. I know it's just something I am not seeing.
- Wed Aug 16, 2017 12:04 am
- Forum: Tech Support
- Topic: Need some help setting the Z-endstop
- Replies: 2
- Views: 4487
Re: Need some help setting the Z-endstop
Like on FB, you pointed me in the right direction. When I upgraded I made a change in the wiring harness adding RC connectors to some items. Yea the Zstop was one, and I had disconnected the Zstop one inside my wire loom. Thanks a bunch for he reply.
- Tue Aug 15, 2017 9:30 pm
- Forum: Tech Support
- Topic: Need some help setting the Z-endstop
- Replies: 2
- Views: 4487
Need some help setting the Z-endstop
Can anyone help me out with my Z-Stop? I have a M2D that was upgraded with Dual extruders, 4 point leveling and endstop to the bottom. It' has the silver and black motor.Now I'm finally trying to reset everything so I can start printing again. The Z direction moves correctly when using Jog controls....
- Mon Jul 03, 2017 2:29 am
- Forum: Modifications
- Topic: My overboard Enclosure
- Replies: 2
- Views: 5812
Re: My overboard Enclosure
That's strange, I can see them. I'll check thanks