Search found 17 matches

by no3dprintexperience
Sun Apr 17, 2016 3:15 pm
Forum: M2 Dual Extruder
Topic: Any help with suggested settings? (two colours/oozing)
Replies: 4
Views: 1234

Re: Any help with suggested settings? (two colours/oozing)

Is this the discussion on the S3D forum you were referring to, or is there a more detailed one I couldn't find? https://forum.simplify3d.com/viewtopic.php?f=8&t=4718 I'm not sure I understand the solution he refers to finding. I adjusted my retraction, extrusion multiplier, wiping, and temperature s...
by no3dprintexperience
Sun Apr 17, 2016 1:10 pm
Forum: M2 Dual Extruder
Topic: Any help with suggested settings? (two colours/oozing)
Replies: 4
Views: 1234

Re: Any help with suggested settings? (two colours/oozing)

Thanks, Jules. Unfortunately what you see is the bottom layer because the disk design has some connector features built up on the top layers. Maybe I will try to redesign that component and see if I can come up with something better. I'm hoping to be able to make the dual extruder design work becaus...
by no3dprintexperience
Sun Apr 17, 2016 4:37 am
Forum: M2 Dual Extruder
Topic: Any help with suggested settings? (two colours/oozing)
Replies: 4
Views: 1234

Any help with suggested settings? (two colours/oozing)

I'm trying to print in dual colour PLA and struggling with what I think is primarily oozing. There is a photo of a print I did today attached. If anyone has any suggested settings to try and clean this up, I would appreciate them! Thanks in advance.
by no3dprintexperience
Sun Apr 17, 2016 4:30 am
Forum: M2 Dual Extruder
Topic: Invalid T1?
Replies: 2
Views: 914

Re: Invalid T1?

I had this exact same problem. Jules helped me solve it - you need firmware version 101. You can find it in the thread about Dual w/ LCD screens. Good luck!
by no3dprintexperience
Tue Apr 12, 2016 10:35 pm
Forum: M2 Dual Extruder
Topic: Dual upgrade giving me trouble!
Replies: 16
Views: 3105

Re: Dual upgrade giving me trouble!

Sorry, email isn't working.
by no3dprintexperience
Tue Apr 12, 2016 10:13 pm
Forum: M2 Dual Extruder
Topic: Dual upgrade giving me trouble!
Replies: 16
Views: 3105

Re: Dual upgrade giving me trouble!

Yes, I used Arduino 1.5.5 per the recommendations in the instructions and used the correct firmware. When I had the wrong firmware (the Marlin Black Z Motor one), the extruder worked. I got it to heat to temp using S3D and loaded filament in it with no problem. But when I tried to level the bed, the...
by no3dprintexperience
Tue Apr 12, 2016 9:45 pm
Forum: M2 Dual Extruder
Topic: Dual upgrade giving me trouble!
Replies: 16
Views: 3105

Re: Dual upgrade giving me trouble!

Answering your other questions, the left nozzle does not get off the side of the bed when it purges. The right nozzle is very close to, maybe just past, the side of the bed, but the left nozzle is at least an inch onto the glass. And when I reposted your profile, I just posted the same file I downlo...
by no3dprintexperience
Tue Apr 12, 2016 9:43 pm
Forum: M2 Dual Extruder
Topic: Dual upgrade giving me trouble!
Replies: 16
Views: 3105

Re: Dual upgrade giving me trouble!

I reset all settings through S3D and am still getting the same invalid extruder error. Is it possibly related to the firmware? Because when I loaded my filament, I was using the Marlin Black Z Motor firmware, but then I couldn't get the bed to level and had to upload the Production SnNRd firmware. T...
by no3dprintexperience
Tue Apr 12, 2016 9:38 pm
Forum: M2 Dual Extruder
Topic: Dual upgrade giving me trouble!
Replies: 16
Views: 3105

Re: Dual upgrade giving me trouble!

Ok, I know this worked yesterday because that's how I was able to get the filament loaded. I just tried again and got this error: SENT: M104 S205 T1 RECEIVED: echo:M104 Invalid extruder M104 Invalid extruder So I am going to assume that is related to the FFF file I imported? Because it worked yester...
by no3dprintexperience
Tue Apr 12, 2016 3:51 am
Forum: M2 Dual Extruder
Topic: Dual upgrade giving me trouble!
Replies: 16
Views: 3105

Re: Dual upgrade giving me trouble!

Awesome, I am looking to go to bed too! We will reconnect tomorrow, but I did read the Beginners Guide and reset the gap per instructions. Thanks again.