Search found 4 matches

by cooolor
Fri Sep 29, 2017 8:18 pm
Forum: How-to/Guides/Tips
Topic: Making Z calibration easier
Replies: 2
Views: 7923

Re: Making Z calibration easier

I put a big nut (1/2in or so) and a couple of washers under the lock nut so it's more accessible from the top, but I'll try moving it under.
by cooolor
Mon Sep 25, 2017 7:08 pm
Forum: Tech Support
Topic: COM port missing
Replies: 2
Views: 4564

Re: COM port missing

Thanks insta,
I had to make it work last weekend so I used a laptop with windows and it worked without issues. I'll keep it in mind next time. Thanks again!
by cooolor
Sun Sep 24, 2017 2:40 am
Forum: Tech Support
Topic: COM port missing
Replies: 2
Views: 4564

COM port missing

Hi there, I'm trying to update firmware (dual extruder with black z motor, purchased 02/16) M2_Dual_Extruder_Marlin_Black_Z_Motor.zip. I don't see the "COM" port in the list - see attached screenshots. I have a 2016 MBP without USB ports - using an adapter (not sure if that's the problem). Any ideas...
by cooolor
Tue Oct 04, 2016 10:51 pm
Forum: Tech Support
Topic: Home Z moves the plate the opposite direction
Replies: 3
Views: 5144

Home Z moves the plate the opposite direction

I just swapped the board (due to a faulty USB connector). Everything seems to be ok, except when I try to Home All (via Simplify3D), the bed goes down while homing the Z axis. It's obviously reversed - do you have an idea where to look first? Attached communication screenshots. On the board - LED 5 ...