Search found 4 matches
- Fri Sep 29, 2017 8:18 pm
- Forum: How-to/Guides/Tips
- Topic: Making Z calibration easier
- Replies: 2
- Views: 7932
Re: Making Z calibration easier
I put a big nut (1/2in or so) and a couple of washers under the lock nut so it's more accessible from the top, but I'll try moving it under.
- Mon Sep 25, 2017 7:08 pm
- Forum: Tech Support
- Topic: COM port missing
- Replies: 2
- Views: 4564
Re: COM port missing
Thanks insta,
I had to make it work last weekend so I used a laptop with windows and it worked without issues. I'll keep it in mind next time. Thanks again!
I had to make it work last weekend so I used a laptop with windows and it worked without issues. I'll keep it in mind next time. Thanks again!
- Sun Sep 24, 2017 2:40 am
- Forum: Tech Support
- Topic: COM port missing
- Replies: 2
- Views: 4564
COM port missing
Hi there, I'm trying to update firmware (dual extruder with black z motor, purchased 02/16) M2_Dual_Extruder_Marlin_Black_Z_Motor.zip. I don't see the "COM" port in the list - see attached screenshots. I have a 2016 MBP without USB ports - using an adapter (not sure if that's the problem). Any ideas...
- Tue Oct 04, 2016 10:51 pm
- Forum: Tech Support
- Topic: Home Z moves the plate the opposite direction
- Replies: 3
- Views: 5150
Home Z moves the plate the opposite direction
I just swapped the board (due to a faulty USB connector). Everything seems to be ok, except when I try to Home All (via Simplify3D), the bed goes down while homing the Z axis. It's obviously reversed - do you have an idea where to look first? Attached communication screenshots. On the board - LED 5 ...