Search found 39 matches
- Mon Jul 04, 2016 6:13 am
- Forum: General Discussion
- Topic: puzzling first layer height issue
- Replies: 3
- Views: 5028
Re: puzzling first layer height issue
if your moving the bed closer by setting that to 90 And that is the missing piece of the puzzle. I didn't realize that is what was happening. So, if my layer height is set to .2 the 90% would raise the bed by .02? So let's say that my global offset is -.05 (arbitrary number because i cant remember ...
- Sun Jul 03, 2016 5:35 pm
- Forum: General Discussion
- Topic: puzzling first layer height issue
- Replies: 3
- Views: 5028
puzzling first layer height issue
So here is my dilemma, Everything i've been reading here says i should set my first layer height to 100%. But when i do that, there are gaps between the shells and the infill. These go away by later 3 or so. I also have adhesion issues when its set to 100%. Mostly because the infill is not properly ...
- Sun Jul 03, 2016 5:18 pm
- Forum: Tech Support
- Topic: Fusion 360 - Cut curved cylinder at angle
- Replies: 6
- Views: 10515
Re: Fusion 360 - Cut curved cylinder at angle
Someone who is better at design than me im sure will give a better answer, but the way i would tackle this, Extrude the plane you have at 20 degrees and then subract it from the original. Example video here. https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/screencast/Main/Details...
- Thu Jun 30, 2016 1:57 am
- Forum: Tech Support
- Topic: What is the pupose of the MicroSD card?
- Replies: 11
- Views: 15830
Re: What is the pupose of the MicroSD card?
Some will tell you differently. If you have to print the same thing over and over again i can definitely see the benefits. I've also seen people lose jobs mid print because something happened with the PC/MAC or the cable. Brown-outs on a desktop will also cause issues. If your M2 is on a UPS, and pr...
- Thu Jun 30, 2016 1:26 am
- Forum: Tech Support
- Topic: What is the pupose of the MicroSD card?
- Replies: 11
- Views: 15830
Re: What is the pupose of the MicroSD card?
It is indeed.
You would save the Gcode to the SD card, drop the sd card back in the M2, and tell whatever you are using to control the printer (s3d, octoprint, etc) to print the gcode from the sd card attached to the M2.
You would save the Gcode to the SD card, drop the sd card back in the M2, and tell whatever you are using to control the printer (s3d, octoprint, etc) to print the gcode from the sd card attached to the M2.
- Thu Jun 30, 2016 1:22 am
- Forum: Modifications
- Topic: nema17 dampers
- Replies: 160
- Views: 301087
Re: nema17 dampers
Ohhh Emmmm Geeeee.
The difference is astounding!
Judging by how people were talking i knew there would be a difference, but wow. What a difference. Well worth the money.
Thanks Insta!
The difference is astounding!
Judging by how people were talking i knew there would be a difference, but wow. What a difference. Well worth the money.
Thanks Insta!
- Sat Jun 25, 2016 3:35 am
- Forum: Modifications
- Topic: E3D ships upgraded bits
- Replies: 4
- Views: 6352
Re: E3D ships upgraded bits
Thanks
- Sat Jun 25, 2016 3:10 am
- Forum: Modifications
- Topic: E3D ships upgraded bits
- Replies: 4
- Views: 6352
Re: E3D ships upgraded bits
So how much of a pain would it be to try and get the firmware working with one of the 3 in 1 out e3d ends?
- Wed Jun 22, 2016 4:03 am
- Forum: General Discussion
- Topic: Just saying Thanks
- Replies: 2
- Views: 4050
Just saying Thanks
You guys are a wealth of knowledge, and i learn something every day here.
So thanks for that.
So thanks for that.
- Sat Jun 18, 2016 9:26 pm
- Forum: Filament
- Topic: Clear ABS issues
- Replies: 3
- Views: 7385
Re: Clear ABS issues
Thanks Jim.
Ill guess ill go do some more tweaking with this clear.
Ill guess ill go do some more tweaking with this clear.