Search found 178 matches

by CCRN
Sun Feb 03, 2019 5:03 pm
Forum: Tech Support
Topic: Firmware Origin Dual
Replies: 1
Views: 199

Firmware Origin Dual

Hello, I checked my printer firmware origin today to see if 0,0,0 is in a printable area of the bed. I used the following G-Code G28 G1 X0 Y0 Z0 F3000 The results shows the print head off the bed and in the corner of the clip area. I suspect this is due to the roughly 31.1 x offset for a dual extrud...
by CCRN
Wed Jan 30, 2019 4:55 pm
Forum: Modifications
Topic: Flexible Magnetic Print System for Maker Gear
Replies: 12
Views: 1114

Re: Flexible Magnetic Print System for Maker Gear

+1 for my M2 if you move forward.
by CCRN
Wed Jan 30, 2019 2:58 pm
Forum: General Discussion
Topic: Simplify3D M2 Dual - Single Extruder Issue
Replies: 3
Views: 382

Re: Simplify3D M2 Dual - Single Extruder Issue

If this is not something that the user can fix in the settings, does this mean that Makergear accepts this representation of a Dual M2? Wondering why it hasn't been addressed. Dual Extruder M2 machines are not a new product.
by CCRN
Sun Jan 27, 2019 6:41 pm
Forum: General Discussion
Topic: Simplify3D M2 Dual - Single Extruder Issue
Replies: 3
Views: 382

Simplify3D M2 Dual - Single Extruder Issue

Good Morning!, I am still chugging along with my M2 and was wondering if there is a solution to an issue I am having. I have a dual extruder on my printer that puts the left extruder off center when compared to an M2 Single. I usually print with the left extruder when printing one color. Simplify3D ...
by CCRN
Sun Aug 12, 2018 4:05 pm
Forum: Software
Topic: S3D Slicing Issue
Replies: 4
Views: 962

Re: S3D Slicing Issue

airscapes wrote:
Fri Aug 10, 2018 3:54 am
First go to repair and check the model for errors
Next if these are thin walls, go to advance tab and turn set allow single extrude wall and allow single extrude infill and then slice
This fixed my slice. Thanks!
by CCRN
Sun Aug 12, 2018 3:28 pm
Forum: Software
Topic: S3D Slicing Issue
Replies: 4
Views: 962

Re: S3D Slicing Issue

Checked for errors and did not find any. Not seeing the thin wall settings in settings in Advanced except for only use perimeters for thin walls. I tried that and it did not help. Just did an update check on my computer and realized it is using an outdated S3D. Downloading now. Screen Shot 2018-08-1...
by CCRN
Fri Aug 10, 2018 1:45 am
Forum: Software
Topic: S3D Slicing Issue
Replies: 4
Views: 962

S3D Slicing Issue

I pulled up an old stl I created from OpenSCAD and when I am slicing it in the latest Mac version, the output shows perimeters missing. The results are not right and I am not sure what is going on. Would someone mind taking a look a the STL?. It slices fine in Slic3r, just not in S3D. Screen Shot 20...
by CCRN
Sun Aug 13, 2017 9:14 pm
Forum: Tech Support
Topic: Hotend Cooling Down During Print
Replies: 4
Views: 2141

Hotend Cooling Down During Print

Hello, Last night my M2 left hot end starting to show a symptom of cooling off a few minutes after the print started. I figured it was the thermistor, but changing it did not help. I tried a completely different hot end and it still has this issue. What is odd is that once I stop the print, the hot ...
by CCRN
Sun Jul 02, 2017 5:14 pm
Forum: Tech Support
Topic: Speed and Strength - 0.75mm Nozzle?
Replies: 7
Views: 1892

Re: Speed and Strength - 0.75mm Nozzle?

Thank you both for responding.

Jerold
by CCRN
Sat Jul 01, 2017 4:06 am
Forum: Tech Support
Topic: Speed and Strength - 0.75mm Nozzle?
Replies: 7
Views: 1892

Speed and Strength - 0.75mm Nozzle?

I designed a model for work that broke too easy at lower infill. It needs a high amount of infill to have durability and to keep them from being broken accidentally. I decided on eSun PETG and I cranked up the infill and some border thickness until the prints became as strong as I felt they needed t...