None of the plastic laid on the bed looks to be overheated. No sign of over temp other than the err message and the printer shuts down.

Looking for help on this one. My M2 E starting throwing an error message of "Max Temp" and then shutting down part way thru laying the raft. What do I look for to fix this issue?

In S3D when editing the process, under the G Code tab, There is a global g code offset setting for the X, Y, and Z axis. adding or subtracting to the Z axis setting should do what you are looking for.

Insta, Your suggestions worked. Thanks

Thanks Insta, I'll give that a try.

IMG_0755.jpg I am having trouble printing a gear. The teeth start off distorted then as the layers progress they begin printing correctly. I am printing with ABS filament. I have tried two different rolls of two different colors both with the same results. I have a PEI surface on my glass bed, and ...

Has anyone else tried the PEI film from CS Hyde co? 3 mil. Ultem®/PEI with 3M™ Acrylic adhesive- Ultem®/PEI (polyetherimide) has struck the 3D printing world as a high performance material for 3D printing beds. Ultem®/PEI film enables 3D printing enthusiasts to produce both ABS and PLA prints. This ...

I've run over 5 rolls of the CF filament and haven't had any problems with layer separation. Also haven't seen any wear on the .35 SS nozzle. I normally run it at 220 to 230 temp setting. The parts a very impact resistant, but once you reach the limit, they snap like they are brittle since the CF is...

Thanks, that worked. Have it open in cadd and able to manipulate it. As I modify it, I'll post some pics and how it works out.

When I go to the STEP file on github and click on it, it shows a txt file full of code, but I haven't figured out how to download the STEP file.