Search found 8 matches
Search found 8 matches • Page 1 of 1
Hi Zemlin, yea this also came to my mind as there is around 2cm space on the right. It could be done at the same time as the carrier needs to be remodeled anyways. From what I see the following items would need a retouch (top down): Glass plate Alu bed Bed heater Spider rail belt Z Stage Maybe firmw...
Hi, so spare part arrived. In the meantime my fingers are 2mm shorther I guess due to drumming and spinning fingers all the time. First thing I did was going back to my notes to check what I wrote down when swiching to the orange PLA one month back in order to underestand how the new filament perfor...
Hello Maker, after happily printing for quite some time, I ran across a problem now I don't find a solution for. I'd appreciate any hint or fingerpoint :-) While printing the first layer I get ~0.5mm steps in the diagonal lines every 3mm or so. I'd attach a picture but it seems like this is not poss...
- Fri Mar 31, 2017 11:16 pm
- Forum: Other (off topic)
- Topic: Adjustable color and air printing filament
- Replies: 3
- Views: 4672
Hi, I just wanted to share my latest results with the adjustable color (ACF) and air printing filament (APF): http://www.sonsts.de/Bilder/newFilament.jpg Main features: The color of the filament can be easily altered after the part has been printed. Due to the light structure of the filament, no sup...
- Sat Nov 12, 2016 7:02 am
- Forum: Modifications
- Topic: Printing on Transparent Laserprinter Film
- Replies: 0
- Views: 1351
Hi, I thought I just share my latest experiment with you :-) As I ran out of Kapton Tape I tried laserprinter transparent color film cut to the size of the platform with bed temp 70°C extruder 215°C. The film has been cleaned after attaching with 91% isoprophyl alcohol. For a first test the sheet wa...