Search found 4 matches

by uli96
Fri Jun 13, 2014 9:03 am
Forum: Tech Support
Topic: most recent firmware for M2 19V/12V (April 2013)
Replies: 10
Views: 14364

Re: most recent firmware for M2 19V/12V (April 2013)

Thanks jsc,

jupp you are right I misread the date to be dd/mm/yyyy (like we do here in Germany), so clearly my mistake :oops:

Thanks

Uli
by uli96
Thu Jun 12, 2014 9:21 pm
Forum: Tech Support
Topic: most recent firmware for M2 19V/12V (April 2013)
Replies: 10
Views: 14364

Re: most recent firmware for M2 19V/12V (April 2013)

Hi, problem found, downloaded Ketil's firmware, but still the problem was the same. What the heck, then I though maybe I have already a 1/16 Microstep Board even when I got my M2 in April 2013. Configured the 1/16 Microstep setup and now it works, Z-Axis still sounds a little odd but thats just some...
by uli96
Thu Jun 12, 2014 7:24 pm
Forum: Tech Support
Topic: most recent firmware for M2 19V/12V (April 2013)
Replies: 10
Views: 14364

Re: most recent firmware for M2 19V/12V (April 2013)

Hi Tim, only thing I see in Configuration.h is: // Microstep setting (Only functional when microstep pins are connected to MCU #define MICROSTEP16 // MICROSTEP16 I did a grep search for MICROSTEP_MODES and nothing turned up. I just tried another print and everything is half the supposed size so yes ...
by uli96
Thu Jun 12, 2014 5:58 pm
Forum: Tech Support
Topic: most recent firmware for M2 19V/12V (April 2013)
Replies: 10
Views: 14364

most recent firmware for M2 19V/12V (April 2013)

Hi, I just replaced my hotend with this one http://www.ebay.de/itm/MG-Plus-Hot-End-for-RepRap-3D-Printer-1-75mm-Filament-0-35mm-Nozzle-hotend-/221232383689 Now I need to change PID firmware settings and for that I downloaded the "latest" firmware from here: http://makergear.wikidot.com/m2-firmware I...