Search found 185 matches

by rsilvers
Tue May 17, 2022 8:41 pm
Forum: Modifications
Topic: MakerGear M2 BIQU H2 V2 Extruder Mount
Replies: 1
Views: 10227

MakerGear M2 BIQU H2 V2 Extruder Mount

I changed to a BIQU extruder as I didn't want a printed extruder in 2022. Also it is running Klipper and I am loving the LCD display.

Here are the files:

https://www.thingiverse.com/thing:5388063

Video of it working:

https://share.icloud.com/photos/001XSyH ... Vwtztkapsg
by rsilvers
Thu Feb 02, 2017 5:24 pm
Forum: Tech Support
Topic: Bad feed drive stepper or other issue?
Replies: 4
Views: 9817

Re: Bad feed drive stepper or other issue?

Pinion ordered. I was able to remove the bad one with pliers and heat gun. Thanks.
by rsilvers
Thu Feb 02, 2017 5:21 pm
Forum: General Discussion
Topic: Will Makergear ever fix the pinion problem?
Replies: 9
Views: 21922

Re: Will Makergear ever fix the pinion problem?

I heated it with a heat gun for a minute and it pulled off without any trouble with a pliers.
by rsilvers
Wed Feb 01, 2017 9:58 pm
Forum: Tech Support
Topic: Bad feed drive stepper or other issue?
Replies: 4
Views: 9817

Re: Bad feed drive stepper or other issue?

I took off the gearbox and wanted to ask if this is how this pinion is supposed to look, or if half of it is sheared off: https://s24.postimg.org/g6fjlfout/Full_Size_Render.jpg Just spinning the removed gearbox, that spins freely and the cogs look ok under a stereo microscope. Assuming this pinion h...
by rsilvers
Wed Feb 01, 2017 5:09 pm
Forum: Tech Support
Topic: Bad feed drive stepper or other issue?
Replies: 4
Views: 9817

Bad feed drive stepper or other issue?

I was making a print and then heard the printer making a bad skipping sound. I went to look, and the filament was tangled on the spool. I untangled it, but now I can't get the printer to work again - it skips when feeding. I took apart the feed system and cannot find any clogs or binding. I noticed ...
by rsilvers
Mon Jun 06, 2016 1:30 am
Forum: General Discussion
Topic: Favorite Print Surface?
Replies: 61
Views: 89136

Re: Favorite Print Surface?

Image
by rsilvers
Sun Jun 05, 2016 9:34 pm
Forum: General Discussion
Topic: Favorite Print Surface?
Replies: 61
Views: 89136

Re: Favorite Print Surface?

Made this Mic-6 plate today:

Image

I use purple gluestick. Gluestick or certain types of hairspray are the way to go.

I am always surprised when I see people still using obsolete surfaces such as Kapton tape, painter's tape, ABS glue, etc.
by rsilvers
Sun May 29, 2016 5:11 pm
Forum: Printed Object Showcase
Topic: Printed a MTB stem.
Replies: 4
Views: 9097

Re: Printed a MTB stem.

Yes. I just rode down some stairs.
by rsilvers
Sun May 29, 2016 3:07 pm
Forum: Printed Object Showcase
Topic: Printed a MTB stem.
Replies: 4
Views: 9097

Printed a MTB stem.

I have a real 60mm on order, but got impatient, so I designed and printed a 50mm one out of eSun PETG-G to see what it would be like:

http://www.thingiverse.com/thing:1594904

Image
Image