Search found 27 matches

by bratan
Fri Feb 21, 2020 2:41 am
Forum: Tech Support
Topic: Bed Not Heating M2 Rev. E
Replies: 22
Views: 2341

Re: Bed Not Heating M2 Rev. E

Update: Got it removed and replaced. Just needed more temperature and some solder probably helped... Working now! :) Thanks a lot for part number!
by bratan
Thu Feb 20, 2020 10:23 pm
Forum: Tech Support
Topic: Bed Not Heating M2 Rev. E
Replies: 22
Views: 2341

Re: Bed Not Heating M2 Rev. E

For anyone who stumbles on this thread in the future, replacing the MOSFET was cheap and easy and worked great, $0.92 vs $170 new RAMBo. Mouser part: https://www.mouser.com/ProductDetail/nexperia/psmn7r0-60ys115/?qs=O%2F7ihdSJpeaTQbWGBVjWjg%3D%3D&countrycode=US¤cycode=USD Would you mind shari...
by bratan
Sat Mar 02, 2019 11:14 pm
Forum: Tech Support
Topic: Spider is a lot higher on one side
Replies: 1
Views: 589

Re: Spider is a lot higher on one side

Took small level and check various parts of the printer. Top X platform is not square to the rest of the frame, that's the reason for this...
Going to see if I can shim Spider ...
by bratan
Sat Mar 02, 2019 11:13 pm
Forum: Tech Support
Topic: Z axis drops after spider upgrade
Replies: 1
Views: 555

Re: Z axis drops after spider upgrade

Just realized it's happening when I hit the nozzle. I guess it's enough to make motor stall...
by bratan
Sat Mar 02, 2019 8:06 pm
Forum: Tech Support
Topic: Z axis drops after spider upgrade
Replies: 1
Views: 555

Z axis drops after spider upgrade

I'm have yet another issue with my Rev D to 4 point spider upgrade. It doesn't look like Z motor has enough torque to hold new heavier table. Especially if I use MIC6 plate. With plate it drops like a rock as soon as I go high enough. But even without MIC6 it stays up for few minutes and then drops ...
by bratan
Sat Mar 02, 2019 6:41 pm
Forum: Tech Support
Topic: Spider is a lot higher on one side
Replies: 1
Views: 589

Spider is a lot higher on one side

Hi, I just installed 4 point spider upgrade on my M2 Rev D. I immediately noticed something very wrong when leveling bed. So I took of HBP completey and checked height of new spider from the top of the frame. It's about 5 mm lower on right side :( I removed it from bearing, reinstalled but it's stil...
by bratan
Mon Feb 18, 2019 4:51 pm
Forum: Modifications
Topic: M2 Rev D Z motor upgrade
Replies: 0
Views: 1186

M2 Rev D Z motor upgrade

Hi guys, I have M2 Rev. D with silver Z motor. I wanted to upgrade to black one with finer pitch leadscrew... I was reading this thread and this guide that mention that silver motor can be upgraded with black one without any modifications to the frame... The mounting for the new black motor has chan...
by bratan
Sun Oct 07, 2018 1:44 am
Forum: Tech Support
Topic: Why not update FW for M2 printers?
Replies: 4
Views: 2000

Why not update FW for M2 printers?

I love MakerGear and printers, but you guys dropped the ball on Firmware updates for M2. Problem 1. Firmware doesn't work with latest Arduino IDE and version 1.5.5 needed. The "fix" for this can be implemented in less than 15 minutes by replacing variable types. I've done it and was able to update F...
by bratan
Tue Jun 19, 2018 1:07 pm
Forum: Filament
Topic: Weight of empty Makergear PLA spool?
Replies: 0
Views: 1707

Weight of empty Makergear PLA spool?

How much does empty 1KG spool weights? Interested in both older and newer ones (old one doesn't have holes/windows on sides)... :?:
by bratan
Wed Feb 28, 2018 6:16 pm
Forum: Tech Support
Topic: Reprinting Filament Drive. What material should I use?
Replies: 6
Views: 2421

Re: Reprinting Filament Drive. What material should I use?

Thanks! :)
Just printed mine out of white PETG, drilled out hole with 2 mm drill bit and it seems to work great so far. Ninjaflex no longer jamming so I'm happy.
I'm ordering some ePC so will probably reprint it later. Thanks for the link to hinged version, I'll check it out!