Search found 27 matches
- Fri Feb 21, 2020 2:41 am
- Forum: Tech Support
- Topic: Bed Not Heating M2 Rev. E
- Replies: 22
- Views: 27058
Re: Bed Not Heating M2 Rev. E
Update: Got it removed and replaced. Just needed more temperature and some solder probably helped... Working now! Thanks a lot for part number!
- Thu Feb 20, 2020 10:23 pm
- Forum: Tech Support
- Topic: Bed Not Heating M2 Rev. E
- Replies: 22
- Views: 27058
Re: Bed Not Heating M2 Rev. E
For anyone who stumbles on this thread in the future, replacing the MOSFET was cheap and easy and worked great, $0.92 vs $170 new RAMBo. Mouser part: https://www.mouser.com/ProductDetail/nexperia/psmn7r0-60ys115/?qs=O%2F7ihdSJpeaTQbWGBVjWjg%3D%3D&countrycode=US¤cycode=USD Would you mind shari...
- Sat Mar 02, 2019 11:14 pm
- Forum: Tech Support
- Topic: Spider is a lot higher on one side
- Replies: 1
- Views: 3813
Re: Spider is a lot higher on one side
Took small level and check various parts of the printer. Top X platform is not square to the rest of the frame, that's the reason for this...
Going to see if I can shim Spider ...
Going to see if I can shim Spider ...
- Sat Mar 02, 2019 11:13 pm
- Forum: Tech Support
- Topic: Z axis drops after spider upgrade
- Replies: 1
- Views: 3766
Re: Z axis drops after spider upgrade
Just realized it's happening when I hit the nozzle. I guess it's enough to make motor stall...
- Sat Mar 02, 2019 8:06 pm
- Forum: Tech Support
- Topic: Z axis drops after spider upgrade
- Replies: 1
- Views: 3766
Z axis drops after spider upgrade
I'm have yet another issue with my Rev D to 4 point spider upgrade. It doesn't look like Z motor has enough torque to hold new heavier table. Especially if I use MIC6 plate. With plate it drops like a rock as soon as I go high enough. But even without MIC6 it stays up for few minutes and then drops ...
- Sat Mar 02, 2019 6:41 pm
- Forum: Tech Support
- Topic: Spider is a lot higher on one side
- Replies: 1
- Views: 3813
Spider is a lot higher on one side
Hi, I just installed 4 point spider upgrade on my M2 Rev D. I immediately noticed something very wrong when leveling bed. So I took of HBP completey and checked height of new spider from the top of the frame. It's about 5 mm lower on right side :( I removed it from bearing, reinstalled but it's stil...
- Mon Feb 18, 2019 4:51 pm
- Forum: Modifications
- Topic: M2 Rev D Z motor upgrade
- Replies: 0
- Views: 10566
M2 Rev D Z motor upgrade
Hi guys, I have M2 Rev. D with silver Z motor. I wanted to upgrade to black one with finer pitch leadscrew... I was reading this thread and this guide that mention that silver motor can be upgraded with black one without any modifications to the frame... The mounting for the new black motor has chan...
- Sun Oct 07, 2018 1:44 am
- Forum: Tech Support
- Topic: Why not update FW for M2 printers?
- Replies: 5
- Views: 13594
Why not update FW for M2 printers?
I love MakerGear and printers, but you guys dropped the ball on Firmware updates for M2. Problem 1. Firmware doesn't work with latest Arduino IDE and version 1.5.5 needed. The "fix" for this can be implemented in less than 15 minutes by replacing variable types. I've done it and was able to update F...
- Tue Jun 19, 2018 1:07 pm
- Forum: Filament
- Topic: Weight of empty Makergear PLA spool?
- Replies: 0
- Views: 21729
Weight of empty Makergear PLA spool?
How much does empty 1KG spool weights? Interested in both older and newer ones (old one doesn't have holes/windows on sides)...
- Wed Feb 28, 2018 6:16 pm
- Forum: Tech Support
- Topic: Reprinting Filament Drive. What material should I use?
- Replies: 6
- Views: 9684
Re: Reprinting Filament Drive. What material should I use?
Thanks!
Just printed mine out of white PETG, drilled out hole with 2 mm drill bit and it seems to work great so far. Ninjaflex no longer jamming so I'm happy.
I'm ordering some ePC so will probably reprint it later. Thanks for the link to hinged version, I'll check it out!
Just printed mine out of white PETG, drilled out hole with 2 mm drill bit and it seems to work great so far. Ninjaflex no longer jamming so I'm happy.
I'm ordering some ePC so will probably reprint it later. Thanks for the link to hinged version, I'll check it out!