Cleaned it out with esun cleaning filament. Feeder the petg in everything looks food started the same print tweets one setting and started it 1st layer good 2nd layer bam stopes I watched it the whole time temp stayed at 250 the whole time. 2nd layer has a decent amount of retractions might change t...

Every so often, I find that crap gets in the nozzle. I do not know if it comes from the filament or from dust in the air, but it seems to stay in the nozzle until I take a torch to it. If you have never done that, it is easy and painless, so I recommend you try. So the whole blow torch method I’ve ...

Hi Ringrosa, How long has this spool of filament been open? What temperatures are you printing at? It sounds like you have a clog in your hotend that is causing the extruder motor to grind at the filament. I'd recommend trying a cold pull to see if that resolves the issue. https://makergear.zendesk...

Measured it was 1.76 going in I attached a pic of what it does. Have it all cleared out going to try it again. Measured the filament down the spool a ways it was all 1.75 or 1.76 but will give it a try again.

Ok I have been using the same petg filament for it seems like forever. So here goes. It will start a print, the first layer looks good then it will make it through the 2nd layer almost all the way then stop extruding. I was thinking the nozzle was clogged great, but not the case retract and the fila...

So my wife purchased the V4 upgrade along with the metal motor mount for Christmas. got installed did all the calibrations. The extrusion calibration went great look really good. Did a small test print so see how it prints, printed a small cover for my other 3D printer. Turned out good except there ...

Have leveled bed and it's good. Really just want some S3D PLA Profiles to see if some of my settings are off. also is the V4 EXTRUDER upgrade worth while or does that just get me to a higher temp?

Purchased a Makergear M2 about 2 weeks ago from a guy locally got it for steal $400. So I got it home and did all the calibration that I found here on this fourm. I threw away all of the filament the guy gave me as it was dirty as hell. bought some new Hatchbox Black PLA and have got it printing but...