Search found 16 matches

by mkmachining
Mon May 20, 2019 10:50 pm
Forum: General Discussion
Topic: Anyone have an Ultra One yet?
Replies: 11
Views: 257

Re: Anyone have an Ultra One yet?

Here are my M2 nylon profiles vs a U1 profile with the exact same settings if someone more tech savvy than me wants to tell me what is different. Estimated 21% longer print time on U1. Will report back with actual time, estimated at 58 minutes. Attempted to attach factory files as well, but forum wo...
by mkmachining
Mon May 20, 2019 10:39 pm
Forum: General Discussion
Topic: Anyone have an Ultra One yet?
Replies: 11
Views: 257

Re: Anyone have an Ultra One yet?

Hey Tyler, is this compared to the M2 for the same part with the same speed settings? What are the M205 settings of the Ultra? My standard parts take 30-35 minutes on an M2 with a .5mm nozzle. U1 is taking over an hour, they're pretty small parts. With a Prusa I can make them in less than 20 minute...
by mkmachining
Fri May 17, 2019 6:57 pm
Forum: General Discussion
Topic: Anyone have an Ultra One yet?
Replies: 11
Views: 257

Re: Anyone have an Ultra One yet?

Anyone else trying to speed things up? Haven't had much luck here, my prints are about 2x as long as expected for a given part, and almost exactly 2x the length of the estimated build time on Simplify, sometimes 3x that of the estimate on the machine's LCD.
by mkmachining
Wed May 08, 2019 3:47 pm
Forum: Pre-owned Gear
Topic: M3 ID For Sale
Replies: 4
Views: 207

Re: M3 ID For Sale

I am also interested. Located in MO.
by mkmachining
Tue May 07, 2019 10:06 pm
Forum: General Discussion
Topic: Anyone have an Ultra One yet?
Replies: 11
Views: 257

Re: Anyone have an Ultra One yet?

Alrighty, for anyone with an Ultra One here are my PETG settings. Still not perfect, and still far slower than I'd like but it's making pretty good parts.

What's odd is these settings ended up close to where I started, except now the parts look decent rather than a slopfest. Who knows!
by mkmachining
Thu May 02, 2019 3:23 pm
Forum: General Discussion
Topic: Anyone have an Ultra One yet?
Replies: 11
Views: 257

Re: Anyone have an Ultra One yet?

We've talked a time or ten. No suggestions for me yet. I'm not sure why the stock profile prints on a raft. Only heard of using one on machines that have issues with leveling. Going to print PLA today before going back to PETG. All I ever do is raise up temps for PETG typically, but that is really n...
by mkmachining
Wed May 01, 2019 7:34 pm
Forum: General Discussion
Topic: Anyone have an Ultra One yet?
Replies: 11
Views: 257

Re: Anyone have an Ultra One yet?

Let me know how to report back with values and I'll do so. Have been trying PETG so far before getting to nylon which is what we print almost exclusively. Have a garolite bed we milled waiting. No good results so far in a few hundred hours of test prints trying different settings. For PETG we pretty...
by mkmachining
Wed Apr 24, 2019 5:51 pm
Forum: General Discussion
Topic: Anyone have an Ultra One yet?
Replies: 11
Views: 257

Anyone have an Ultra One yet?

Just got mine a few days ago. Curious about messing with acceleration and jerk. I'm having very slow print times...a 10.5hr print according to the gcode is going to finish around 24 hours which is a crazy difference. Stock settings were much slower than that, I've matched my Prusa MK3 speeds with a ...
by mkmachining
Mon Mar 11, 2019 4:59 am
Forum: Filament
Topic: Nylon
Replies: 27
Views: 2290

Re: Nylon

I have my first batch of production beds ready. They are within .005" flatness edge to edge on both sides. Plan on sending some directly to MG as I hope they stock them, they're simply the best for nylon. PM me if you want one, I expect the first batch of 50 to be gone quickly.
by mkmachining
Mon Mar 11, 2019 4:53 am
Forum: M3-ID
Topic: Simplify 4.0+ issues with M3-ID
Replies: 6
Views: 511

Re: Simplify 4.0+ issues with M3-ID

Wouldn't it be nice if Simplify would put out an update? They haven't been helpful at all despite multiple videos, gcodes, factory files, etc.

Another issue is I can't print high infills. No matter what I select it prints at 25%ish infill, much lighter than my typical 50% infill I use with my M2s.