Search found 298 matches

by Farr0wn3d
Fri Mar 23, 2018 2:27 am
Forum: Tech Support
Topic: Steppers acting weird
Replies: 11
Views: 4830

Re: Steppers acting weird

The M502 command fixed it.

If reflashing doesnt change my firmware, then what does it do?
by Farr0wn3d
Fri Mar 23, 2018 2:21 am
Forum: Tech Support
Topic: Steppers acting weird
Replies: 11
Views: 4830

Re: Steppers acting weird

I was not aware... M503 returns this: Steps per unit: M92 X88.88 Y88.88 Z1011.00 E430.00 Maximum feedrates (mm/s): M203 X200.00 Y200.00 Z25.00 E25.00 Maximum Acceleration (mm/s2): M201 X1200 Y1200 Z200 E10000 Acceleration: S=acceleration, T=retract acceleration M204 S2000.00 T10000.00 Advanced varia...
by Farr0wn3d
Fri Mar 23, 2018 12:27 am
Forum: Tech Support
Topic: Steppers acting weird
Replies: 11
Views: 4830

Re: Steppers acting weird

Shouldnt reflashing the whole firmware resolve any firmware related issues? One thing to keep in mind is that you can send the same command 10 times, and a few of those 10 times it will actually work properly. This is for every stepper, not just the extruder. I totally removed the board, thoroughly ...
by Farr0wn3d
Thu Mar 22, 2018 12:56 am
Forum: Tech Support
Topic: Steppers acting weird
Replies: 11
Views: 4830

Re: Steppers acting weird

Fair enough. I saw that mentioned on a marlin forum, so I gave it a shot thinking that I could just reverse it if it gave me grief. But seeing as how I've reflashed the firmware and the problem persists, I assume that unless that negative value caused some sort of physical damage to all of my steppe...
by Farr0wn3d
Wed Mar 21, 2018 3:06 am
Forum: Tech Support
Topic: Steppers acting weird
Replies: 11
Views: 4830

Steppers acting weird

I made some changes to my carriage a day or 2 ago, and with that I took the loom off the cable that goes to the extruder assembly so that I could adjust wire lengths to make everything fit cleanly. I had changed my heater cartridge, so when I turned the printer on, I did a PID autotune, and since I ...
by Farr0wn3d
Tue Feb 27, 2018 1:57 am
Forum: General Discussion
Topic: Still no M4?
Replies: 7
Views: 4676

Still no M4?

Has there been any indication from Makergear as to when we could expect the M4 to be available for sale?
by Farr0wn3d
Wed Nov 01, 2017 12:34 am
Forum: Tech Support
Topic: Annoying Rattle
Replies: 4
Views: 3012

Re: Annoying Rattle

I have that same rattle one my rev E machine. I dont recall having it on my earlier model.
by Farr0wn3d
Thu Sep 14, 2017 1:46 am
Forum: Modifications
Topic: Palette filament guide connector
Replies: 3
Views: 3819

Re: Palette filament guide connector

I would love to see a more in-depth review of the palette+ being used with an M2. I am seriously considering one.
by Farr0wn3d
Fri Aug 18, 2017 1:49 am
Forum: Filament
Topic: PEI Filament
Replies: 6
Views: 5148

Re: PEI Filament

yes i did. I did not print with it a ton, as I didn't want to waste the filament if I wasn't printing it for a purpose. Just printed it until I got the hang of it, and stopped. I fought with it for a while before deciding to dry it in the oven, even though it was fresh out of a vacuum sealed package...
by Farr0wn3d
Tue Aug 15, 2017 1:20 am
Forum: Modifications
Topic: I added an E3D Titan to my M2 and you can too!
Replies: 18
Views: 17604

Re: I added an E3D Titan to my M2 and you can too!

Unless you're wanting the volcano for its own specific advantages (printing fast or large extrusion widths) I would simply get the following: -e3d v6 (not lite), make sure it has the 40w heater cartridge -e3d PT100 upgrade (this is a different temp probe system compared to a thermistor and thermocou...