Search found 185 matches

by Phil
Tue May 16, 2017 3:26 pm
Forum: Filament
Topic: Hatchbox TPU Jamming / Not Feeding
Replies: 5
Views: 5320

Re: Hatchbox TPU Jamming / Not Feeding

I am not sure about Hatchbox TPU; there is information about other flexibles in other threads. I find a larger nozzle helps, 0.50mm, and I print roughly 50% the speed of ABS,PLA, etc. Your temperature also seems low. Other flexibles I use require 250C or so. I had trouble printing softer filaments w...
by Phil
Sun May 07, 2017 2:34 pm
Forum: Filament
Topic: What are the best flexible filaments?
Replies: 14
Views: 11127

Re: What are the best flexible filaments?

I have used several flexible filaments. You can read about them on "Insta's Filaments That Work on the M2" thread.
by Phil
Sun May 07, 2017 2:29 pm
Forum: Getting Started
Topic: Second nozzle sits higher than first. Is this right?
Replies: 2
Views: 2975

Re: Second nozzle sits higher than first. Is this right?

If you intend to print the two different filaments on top of each other, the nozzles have to be the same height. If you are just using one, it is OK to have the one not printing higher.
by Phil
Thu May 04, 2017 2:06 pm
Forum: Tech Support
Topic: First layer sticking issues
Replies: 7
Views: 4672

Re: First layer sticking issues

From the extruder temperature, I presume you are using PLA. Are you using the cooling fan? At which layer? One thing you can check is the Z-height. What are your Layer1 and Layer2 Z-heights, as you print? I usually see 0.18 on Layer1 and 0.38 on Layer2, which is what I want ,(0.20 difference), for a...
by Phil
Wed May 03, 2017 9:17 pm
Forum: Tech Support
Topic: First layer sticking issues
Replies: 7
Views: 4672

Re: First layer sticking issues

Temperatures, extruder and bed? Materials, filament and bed?
by Phil
Wed May 03, 2017 9:13 pm
Forum: General Discussion
Topic: Which filament is best to use
Replies: 0
Views: 2735

Re: Which filament is best to use

Go to the FILAMENT thread. Too much there to discuss here...
by Phil
Wed May 03, 2017 9:07 pm
Forum: Printed Object Showcase
Topic: Speakers
Replies: 6
Views: 5499

Re: Speakers

I like the base, too. How do they sound?
by Phil
Wed May 03, 2017 9:05 pm
Forum: Tech Support
Topic: PETG lifting up on large prints
Replies: 11
Views: 5889

Re: PETG lifting up on large prints

what can I do to have a stable large format print???? I have had some materials let loose of the bed, but only on tall, skinny parts. Your broad, flat part should not be an issue. Two possibilities I can think of: Your bed is not clean; Your nozzle is clogged. I have rarely had a problem with PETG ...
by Phil
Mon May 01, 2017 10:28 pm
Forum: Tech Support
Topic: PETG lifting up on large prints
Replies: 11
Views: 5889

Re: PETG lifting up on large prints

What is your bed? Kapton tape on glass? Is it possibly not clean enough? Off hand, it appears your initial gap between bed and nozzle is too large. The threads of filament appear more round than they should be if they were being squished enough. You might try adjusting your Z-axis knob to reduce/fin...
by Phil
Mon Apr 24, 2017 3:55 pm
Forum: General Discussion
Topic: Who is going to Rapid?
Replies: 4
Views: 3996

Re: Who is going to Rapid?

I will be there and look forward to meeting you, Rick.