Search found 194 matches
- Mon Feb 05, 2018 6:47 pm
- Forum: General Discussion
- Topic: How much gantry curvature is too much?
- Replies: 5
- Views: 11625
Re: How much gantry curvature is too much?
I really don't bother much measuring the plate but I print 5 boxes 2cm x 2cm x 2mm (10 layer .2) then I measure if they are really 2mm usually I get a range between 1.89-2.04 (I try to squish them a little) so more o less I know there is a variance of 0.15mm overall. sometimes I am lucky and it goes...
- Fri Aug 25, 2017 12:13 am
- Forum: Printed Object Showcase
- Topic: New model
- Replies: 4
- Views: 8557
Re: New model
http://i.imgur.com/ulJ2IX9.jpg each floor is modeled with room easily assemblable no need of glue so u can open them the trick was to align shaft and elevator and make a little trip that holds them in place when stacked think about a Matryoshka doll the way it open http://i.imgur.com/GMxqSoz.jpg i ...
- Tue Aug 22, 2017 12:17 am
- Forum: Printed Object Showcase
- Topic: New model
- Replies: 4
- Views: 8557
Re: New model
2.5 y/o printer and still working pretty good ^_^ all piece fit into each other with a precision of .6mm
- Thu Aug 17, 2017 5:09 pm
- Forum: Printed Object Showcase
- Topic: New model
- Replies: 4
- Views: 8557
New model
http://i.imgur.com/vbc2PQa.jpg http://i.imgur.com/lKjDinA.jpg "work in progress" All type of wood/algae PLA BASE -Laywood3D (stupidly expensive very weird almost elastic doesn't come on a roll but super easy to print change color with temperature and never warp doesn't even need to stay in dry plac...
- Mon Jul 03, 2017 4:12 pm
- Forum: General Discussion
- Topic: Advantages of M3 over M2
- Replies: 11
- Views: 29289
Re: Advantages of M3 over M2
I think it's quite obvious that the M3 was made for dual head. If you need dual head buy it! (it is an obvious improvement) if you have an M2 that works great and that's all you need (no need another machine to double production) why would you even think you need to buy it. most of the time people a...
- Wed Jun 28, 2017 12:17 am
- Forum: General Discussion
- Topic: What are M2 owners using for fan ducts?
- Replies: 6
- Views: 10514
Re: What are M2 owners using for fan ducts?
https://www.thingiverse.com/thing:1083655
I designed and use this one (actually the slightly slanted one to center it better on the nozzle)
I designed and use this one (actually the slightly slanted one to center it better on the nozzle)
- Thu May 18, 2017 12:20 am
- Forum: General Discussion
- Topic: Maker Faire Tickets
- Replies: 3
- Views: 7298
Re: Maker Faire Tickets
^_^ Not sure how good of a help I can be but I am available both days in the morning Saturday and/or Sunday from very early (8:00-8:30 AM) to 1:30 PM Afternoon, unfortunately, I have to work... the only time I did help in a faire was in Italy and my Italian is much better than my English and it was ...
- Wed May 17, 2017 12:35 am
- Forum: General Discussion
- Topic: The State of the Gear
- Replies: 106
- Views: 278966
Re: The State of the Gear
I really like the 300x300 bed space 0___0 when when
- Fri Mar 03, 2017 1:23 am
- Forum: Printed Object Showcase
- Topic: Challenge - Spiral Stair
- Replies: 6
- Views: 9861
Re: Challenge - Spiral Stair
Not sure I have a stair like that in Italy in Tuscany my parents go up and down many times a day, and they are not that young anymore Three floors is not the end of the world (anyway, that's an emergency stair and wouldn't normally be used) that's a project I did in 2010 I can't find a "real" pictur...
- Wed Mar 01, 2017 2:23 am
- Forum: How-to/Guides/Tips
- Topic: Tip on preventing edges from lifting?
- Replies: 3
- Views: 7961
Re: Tip on preventing edges from lifting?
Make sure the distance between the first layer and the base is the correct one I print with nozzle 0.5 reach later 0.34 (3 layers = 1mm) I print a calibration test print (5 rectangular boxes one center 1 each corner) tall 3.00MM (9 layers) then I lift them and measure each one with a caliber, and I ...