Search found 45 matches
- Wed Feb 11, 2015 2:06 pm
- Forum: Tech Support
- Topic: Cura or printer issue?
- Replies: 14
- Views: 14699
Re: Cura or printer issue?
It goes to the corner and rases the bed to the limit switch to zero in itself. It then drops a distance and while traveling to first print point it rases the bed however it does not raise it enough from what I am finding.
- Wed Feb 11, 2015 5:53 am
- Forum: Tech Support
- Topic: Cura or printer issue?
- Replies: 14
- Views: 14699
Re: Cura or printer issue?
[profile] layer_height = 0.10 wall_thickness = .399 retraction_enable = False solid_layer_thickness = 0.6 fill_density = 100 nozzle_size = 0.35 print_speed = 20 print_temperature = 210 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 print_bed_temperature = 60 support = None plat...
- Wed Feb 11, 2015 4:57 am
- Forum: Tech Support
- Topic: Cura or printer issue?
- Replies: 14
- Views: 14699
Re: Cura or printer issue?
This I am sure is a dumb question. But where do I find my cura profile?
- Wed Feb 11, 2015 3:50 am
- Forum: Tech Support
- Topic: Cura or printer issue?
- Replies: 14
- Views: 14699
Cura or printer issue?
So back story. The last time I printed the printer was great but that was a bit ago. I also changed computers and have a new version of Cura 14.09 that I am using. Problem 1 The printer calibrates going to the corner and raises the z axis until it hits the limit switch. This is perfect, however when...
- Wed Feb 11, 2015 3:37 am
- Forum: Tech Support
- Topic: clumps when printing
- Replies: 6
- Views: 7540
Re: clumps when printing
I am going to start a new thread on my findings and added problems. I don't think the title fits the thread anymore after my next post.
New thread viewtopic.php?f=7&t=1916
New thread viewtopic.php?f=7&t=1916
- Tue Feb 10, 2015 4:00 am
- Forum: Tech Support
- Topic: clumps when printing
- Replies: 6
- Views: 7540
Re: clumps when printing
I will try the way I set it up is I fold a paper over in two and adjust it so the paper has friction when I pull it out from between the nozzle and the bed.
Any better suggestions? I will try to take a video but I don't know how easy that will be so you can see the gap.
Any better suggestions? I will try to take a video but I don't know how easy that will be so you can see the gap.
- Tue Feb 10, 2015 3:49 am
- Forum: Tech Support
- Topic: clumps when printing
- Replies: 6
- Views: 7540
Re: clumps when printing
settings
- Tue Feb 10, 2015 3:41 am
- Forum: Tech Support
- Topic: clumps when printing
- Replies: 6
- Views: 7540
Re: clumps when printing
A picture to help you understand what I am seeing.
- Tue Feb 10, 2015 3:35 am
- Forum: Tech Support
- Topic: clumps when printing
- Replies: 6
- Views: 7540
clumps when printing
So I have the maker gear m2 and I have not printed for a while. I just started to print again and my filament is not coming out in a smooth line its dropping clumps . Any ideas? I am using pla at 210 bed at 60. It comes out and raps on the nozzle and will deposits clumps alone the path it takes.
- Sun Jun 15, 2014 3:28 am
- Forum: Software
- Topic: I have a strange question
- Replies: 41
- Views: 57331
Re: I have a strange question
Anyone interested let me know I will put together the schematics.