AC computer cord
AC female outlet plug
A few connectors to connect wires
2 momentary on switches
Voltage regulator
Heat sink
Circuit board
12v NO 12A@ 125acv relay
.1 UF capacitor
.33 uf capacitor
2 transistors
2 diodes
10k resister
2 3.3k resistors
Wire

I think that was all o and I made the box

I did print the box. Whats a BOM?

Part one
http://www.youtube.com/watch?v=LZQ9120EorI

Part 2
http://www.youtube.com/watch?v=GZ2dmGe1slY

I have video of it working but this forum does not seem to allow videos. Any ideas? I have tried AVI and MP4 with no luck.

Thanks I will try that also.

I will try that. Pin 4 is not used by anything else right? Even with is in the code already?

I am its on the same row as 13 and I can get that one just fine. can you control your pin 4 or 5?

Ok so the box is done and working. However I am not able to control digital pin 4 or 5. I only seem to be able to control digital pin 13 with the light. That once works for what I need however I dont know if that light ever turns on during a print. If it does it will turn off the printer. Any ideas?...

As soon at it is done I will post a video of it working and get you guys info.

Update to project. I have completed all the circuits and have tested all but one. I am printing the box the electrincis are going in so I cant test the last circuit until that is done.