Search found 319 matches
- Fri Mar 23, 2018 2:47 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16895
Re: Steppers acting weird
Reviewing the difference between the settings that were giving me trouble and the ones that were hardcoded has me confused as to where some of those values came from. I have adjusted the steps/mm and the jerk and accel values, but not to the ones that are listed in the settings... Is it possible tha...
- Fri Mar 23, 2018 2:27 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16895
Re: Steppers acting weird
The M502 command fixed it.
If reflashing doesnt change my firmware, then what does it do?
If reflashing doesnt change my firmware, then what does it do?
- Fri Mar 23, 2018 2:21 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16895
Re: Steppers acting weird
I was not aware... M503 returns this: Steps per unit: M92 X88.88 Y88.88 Z1011.00 E430.00 Maximum feedrates (mm/s): M203 X200.00 Y200.00 Z25.00 E25.00 Maximum Acceleration (mm/s2): M201 X1200 Y1200 Z200 E10000 Acceleration: S=acceleration, T=retract acceleration M204 S2000.00 T10000.00 Advanced varia...
- Fri Mar 23, 2018 12:27 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16895
Re: Steppers acting weird
Shouldnt reflashing the whole firmware resolve any firmware related issues? One thing to keep in mind is that you can send the same command 10 times, and a few of those 10 times it will actually work properly. This is for every stepper, not just the extruder. I totally removed the board, thoroughly ...
- Thu Mar 22, 2018 12:56 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16895
Re: Steppers acting weird
Fair enough. I saw that mentioned on a marlin forum, so I gave it a shot thinking that I could just reverse it if it gave me grief. But seeing as how I've reflashed the firmware and the problem persists, I assume that unless that negative value caused some sort of physical damage to all of my steppe...
- Wed Mar 21, 2018 3:06 am
- Forum: Tech Support
- Topic: Steppers acting weird
- Replies: 11
- Views: 16895
Steppers acting weird
I made some changes to my carriage a day or 2 ago, and with that I took the loom off the cable that goes to the extruder assembly so that I could adjust wire lengths to make everything fit cleanly. I had changed my heater cartridge, so when I turned the printer on, I did a PID autotune, and since I ...
- Tue Feb 27, 2018 1:57 am
- Forum: General Discussion
- Topic: Still no M4?
- Replies: 7
- Views: 12834
Still no M4?
Has there been any indication from Makergear as to when we could expect the M4 to be available for sale?
- Wed Nov 01, 2017 12:34 am
- Forum: Tech Support
- Topic: Annoying Rattle
- Replies: 4
- Views: 7320
Re: Annoying Rattle
I have that same rattle one my rev E machine. I dont recall having it on my earlier model.
- Thu Sep 14, 2017 1:46 am
- Forum: Modifications
- Topic: Palette filament guide connector
- Replies: 3
- Views: 7962
Re: Palette filament guide connector
I would love to see a more in-depth review of the palette+ being used with an M2. I am seriously considering one.
- Fri Aug 18, 2017 1:49 am
- Forum: Filament
- Topic: PEI Filament
- Replies: 6
- Views: 10744
Re: PEI Filament
yes i did. I did not print with it a ton, as I didn't want to waste the filament if I wasn't printing it for a purpose. Just printed it until I got the hang of it, and stopped. I fought with it for a while before deciding to dry it in the oven, even though it was fresh out of a vacuum sealed package...