Looks like the "Thread Fit" spec is different.

Steve,

Would this screw work in the inset you spec'd?

https://www.mcmaster.com/#92200a077/=185jboq

sthone wrote:Here's the Specs to the ones I used.

Thanks. That helps me.

I get my heat set inserts from Mcmaster. Just a heads Up.... If you're going to print that just double check the light you have both of of mine have a tapered base pieces at the bulb head where my mount clamps on but I've been told some lights have a straight piece there so it might not work. -Stev...

Ok, Amazon is great. Now I just have to figure out the size I need. Steve wrote on thingiverse he used 2/56" screws. The female end where it would go measures 3mm wide by roughly 5mm deep. I am thinking this one would be about right and would love some confirmation before I order. https://www.amazon...

I am printing Steve's ikea camera mount from thingiverse.

https://www.thingiverse.com/thing:1691549

I am not familiar with heat set inserts or where to get them locally. Fastenal?

Thanks,

Jerold

Looking forward to seeing the new Makergear M3 and M4 and seeing the hardware/company covered by Joel Telling/3D Printing Nerd at Bay Area Maker Faire!

Thank you very much!

When I fillet a first layer edge, what is a safe radius for the M2 to print successfully? Are there any tricks short of good bed adhesion and temps to get bottom fillets to print well?

Thanks,

Jerold

Hi Will Newton, Thank you very much for taking the time to post. I really appreciate it. I cannot take credit for figuring out the proper way to design my rudimentary dividers for work. I got help from the Rhino forums. I didn't quite follow your directions when I extruded from a 2D drawing. Drawing...