Search found 594 matches
- Fri Nov 16, 2018 9:31 pm
- Forum: Tech Support
- Topic: Makergear M2 stops extruding after many hours midprint
- Replies: 12
- Views: 14296
Re: Makergear M2 stops extruding after many hours midprint
There are filament filters on thingyvers that the filament goes through and it removes any plastic dust on the filament (I have stopped using them as I didn't print any as I got more and more rolls and have had no issue yet) The drive gear and planetary gears withing the extruder drive wear out, but...
- Thu Nov 15, 2018 4:38 am
- Forum: Tech Support
- Topic: PETG Pin Holes?
- Replies: 7
- Views: 7795
Re: PETG Pin Holes?
yes, .4 not the .42 you had said you were using. My M2 has a bowed gantry, with the sides out as much as .06 higher than the center, so I do most of my printing in the center if it small and since I only print stuff for myself, don't have to fill the bed. One of these winter days here soon I will ge...
- Wed Nov 14, 2018 11:47 pm
- Forum: Tech Support
- Topic: PETG Pin Holes?
- Replies: 7
- Views: 7795
Re: PETG Pin Holes?
well you should have NO adhesion issues if using the polymide tape that is stock on the M2 glass. If just glass, then Elmer's purple glue stick worked but I prefer the tape. If it is not sticking and you are using polymide, then your starting height is too high. Here is a link to a factory file for ...
- Wed Nov 14, 2018 7:40 pm
- Forum: Tech Support
- Topic: PETG Pin Holes?
- Replies: 7
- Views: 7795
Re: PETG Pin Holes?
what printer are you using and nozzle size? I can give you a factory file for the m2 for esun petG if you want.
- Wed Nov 14, 2018 7:05 pm
- Forum: Tech Support
- Topic: PETG Pin Holes?
- Replies: 7
- Views: 7795
Re: PETG Pin Holes?
rerun at 245 you are way to hot
- Mon Nov 12, 2018 1:16 am
- Forum: Tech Support
- Topic: OctoPrint Starting Height Adjustment Problem
- Replies: 1
- Views: 3632
Re: OctoPrint Starting Height Adjustment Problem
Can't help with the M3, but I would suggest if you don't get a good answer before tomorrow, give support a call.
- Sat Nov 10, 2018 7:44 pm
- Forum: Filament
- Topic: burned(?) PETG in prints
- Replies: 7
- Views: 24210
Re: burned(?) PETG in prints
I have seen that a few times with my white Esun PETG. It happens when plastic get stuck to the nozzle and eventually fall on to the part. Having your starting height perfect is a must along with sufficient retraction to prevent strings. I have found with my M2 using S3D that reducing the default X/Y...
- Sat Nov 10, 2018 7:34 pm
- Forum: Tech Support
- Topic: M3 Probes Breaking
- Replies: 7
- Views: 10468
Re: M3 Probes Breaking
Did I see correctly that the m3 uses a bl touch? Oh man how I despise those things. One of the projects on my list is to convert my z-probe-less M2 to accept a piezo disk so the nozzle will act as the probe. I did a piezo conversion on my other printer and have to say that it’s the best z probe I h...
- Mon Oct 29, 2018 10:58 pm
- Forum: Tech Support
- Topic: strange print
- Replies: 8
- Views: 8433
Re: strange print
That is what I would expect..
- Mon Oct 29, 2018 2:00 pm
- Forum: How-to/Guides/Tips
- Topic: Horizontal axis inaccurate - M3 SE
- Replies: 15
- Views: 38732
Re: Horizontal axis inaccurate - M3 SE
Good to hear it!
Another thing I did with layer height with the miniatures and not sure it is even valid really.. but I would find the max height of the model and choose the layer height that would divide most evenly into it (above .1 and below .2)
Another thing I did with layer height with the miniatures and not sure it is even valid really.. but I would find the max height of the model and choose the layer height that would divide most evenly into it (above .1 and below .2)