Search found 479 matches
- Fri Dec 01, 2017 8:10 pm
- Forum: Tech Support
- Topic: Weird noise from brand new M2 Rev E
- Replies: 7
- Views: 9199
Re: Weird noise from brand new M2 Rev E
It seems to occur a bit before a direction change? I just had a quick listen, as it loud where I am. My first thought was to wonder if it was an oddity in the code from the slicer. Is it just this printer? Do the others print the same model on duplicate settings honklessly? :D If they all do it, at ...
- Thu Nov 30, 2017 1:06 pm
- Forum: Tech Support
- Topic: Brims vs Rafts?
- Replies: 11
- Views: 17711
Re: Brims vs Rafts?
you could try running the first few layers without a fan.
can you post up a screenshot or pic or the stl file so we can see what you got going on printwise?
can you post up a screenshot or pic or the stl file so we can see what you got going on printwise?
- Tue Nov 21, 2017 1:52 pm
- Forum: Other (off topic)
- Topic: CNC Laser cutter/engraver
- Replies: 3
- Views: 24778
Re: CNC Laser cutter/engraver
I have built an MPCNC and use it as a laser engraver. It does a fairly amazing, but slow job. You can’t engrave metal, but plastic/paper/wood (flammable stuff) are not a problem. Also don’t expect much cutting either. The small laser is not powerful enough. Don’t be fooled though, it will easily sta...
- Sat Nov 18, 2017 3:01 pm
- Forum: M2 Dual Extruder
- Topic: Single Outside Layer
- Replies: 3
- Views: 24908
Re: Single Outside Layer
That white lasered over black nylon looks like the way to. Jim has a very good point about bonding between paint and print. Make sure you are using a white lacquer and not an enamel. The acetone solvent will slightly soften the ABS and the paint will stick nicely. The other thought would be to print...
- Sat Nov 18, 2017 2:32 pm
- Forum: Filament
- Topic: Aging of PETG Filament?
- Replies: 8
- Views: 22013
Re: Aging of PETG Filament?
It is not uncommon to have an issue switching back to PLA from PETG. You may have a partial clog even with cleaning filament. It may work the first few times, but after a lot of switching, you may just need to pull the nozzle and torch it. It could be a piece of PETG that has hardened or a bit of PL...
- Tue Nov 14, 2017 3:10 pm
- Forum: Getting Started
- Topic: A good start
- Replies: 71
- Views: 229421
Re: A good start
Another cool project from Thingiverse. This is the O’Cello. It is about 4feet tall and printed in multiple parts. This is an impressive looking project, but is not that difficult to build. I made a few custom parts that I uploaded back to Tverse as remixes. https://www.thingiverse.com/thing:1703629 ...
- Tue Nov 14, 2017 2:55 pm
- Forum: Getting Started
- Topic: Refurbished not recommended for new users?
- Replies: 9
- Views: 13644
Re: Refurbished not recommended for new users?
Don’t overhink it! Just use the bolt with a slightly snug hole and run it through and give it a few extra turns and it will self ream the hole to a perfect fit. I too, make mechanical stuff with my printer. You should go over to thingiverse and look at the Tools category. Simply amazing work being d...
- Wed Nov 01, 2017 12:13 am
- Forum: Tech Support
- Topic: Priorities for "Hot Rodding" My M2E?
- Replies: 4
- Views: 5834
Re: Priorities for "Hot Rodding" My M2E?
Flip that list upside down. You nailed it Insta. Plus, the other mods are very easy to knock out first. I have not met an “enclosure problem” that could not be solved by better adhesion, leveling, or software tweak as long as you have reasonable surrounding temps. Constant warp in front sounds like...
- Sat Oct 28, 2017 1:12 pm
- Forum: Filament
- Topic: PETG: Bond Strength vs. Support Tradeoff?
- Replies: 11
- Views: 19620
Re: PETG: Bond Strength vs. Support Tradeoff?
why not print the strap upside down so you don’t need support? hard to tell if you can do that from your photo, but it looks like the simplest solution. Also, your title is about PETG, your post is about PLA, and your temps are closer to PETG and way too high for PLA. If you are running PLA that hig...
- Sat Oct 28, 2017 1:06 pm
- Forum: Filament
- Topic: PLA Plus Other Than eSun?
- Replies: 10
- Views: 32128
Re: PLA Plus Other Than eSun?
Stick up a screenshot of the “flexible snap feature” and you may get some feedback on improving the design for PLA. PLA snap fits are totally doable. Most of the time you can get them to work just fine by designing a less aggressive hook or working the hook lightly with a file to smooth the action a...