Just as the title says, is our M2's limited to the 8x10x8 build area or can we push it a little bit, I'm asking this because a) I'm at work and don't have my printer in front of me to check, b) because one of hte engineers at work wants to 3d print a robot attachment for a trade show, he asked me if...

Sadly I've neglected to maintain humidity levels of that reel from gizmodorks, and just printed it, but still i didn't notice much difference in print performance, just know If I'm going to be inactive for more then a few days I need to cover the printer, the old v3a head got really clogged and coul...

I don't think you 'need' to get rid of the rest of the roll, I just finished up a roll of 1.75 natural PLA, i hadn't used it for...maybe 3 months and it had snapped twice at the reel end of the guide and once at the extruder end, but I still used it and it printed just fine for maybe....20 test tile...

It appears all my issues were just, bad bed leveling, incorrect slicer settings, and a dirty hot end, considering I just did a test piece at .1mm layer thickness, 30% honeycomb infil...took 3hours but thats to be expected, here are some pics of it in progress and the end result. http://img.photobuck...

Thanks for the info, I tried a few cold pulls since I made this post and you guys responded, and the cold pulls didn't seem to fix anything, took it to work today and used some of the drill bits there (we have down to 1/64 (.5mm)), finger drilled the extruder and now it seems to extrude vertical now...

I've been having issues with my prints not coming out the way they did when I first got the M2, so I'm looking for any ideas suggestions as to what to do or what may be the cause of these issues. When I try to print PLA with the hot end at <195C the extruder stepper stutters, I think its just too mu...