-The ridgity and robustness of the 1 piece stainless steel chassis. -Simplicity of the Rev E. style bed leveling. -Responsiveness of customer support -The large community of M2 users. -3d Hubs ratings and awards for best enthusiast printer 2015 & 2016. -Backward compatible updates that let owners pi...

The Rev. E machines do not have springs. The bed leveling procedure is completely different than the 3 point leveling you currently have. You would need to upgrade to the 4 point spider that solid mounts to the z platform.

I don't think the M2 was ever offered with the V2 hot end? I think they started with the V3A, then V3B came, and currently the V4. V3A = groove mounted heating element was nichrome wire wrapped and cemented in fire cement. Thermistor mounted on nozzle. V3B = groove mounted horizontally oriented cart...

The latest firmware you loaded onto the Rambo is the Rev. E firmware for the 4 point spider leveling and the z axis home switch at the bottom. Fans should power up a couple seconds when power is turned on and then will turn off. Once the hot end reaches 50*C, the fans will kick on again. The latest ...

I was doing a little browsing on Thingiverse and I was surprised to come across these!

http://www.thingiverse.com/kingscharter/designs

Ebay listings can be reported stolen. Maybe that might prevent them from selling it.

I'd be interested in checking out the .reg file.

I haven't seen Capt. John around here in awhile, but he has made some. I don't think his models are open for sharing though.

viewtopic.php?f=6&t=1507

viewtopic.php?f=2&t=119

You should be able to print with the metal motor mount without the wiring enclosure. The wiring enclosure just secures the wires/connectors and makes it look tidy. You should be able to ziptie the wires together for just that one print.

You could try CA glue kicker. You glue up your parts and then spritz it over the joint and it should set the glue immediately.

http://www.amazon.com/Bob-Smith-151-Ins ... B0000DD1QR

Epoxy also works and comes in different working times such as 5 minutes or 30 minutes.