Very Nice! Thanks for posting this.

Replaced heater and thermistor, but same behavior. I'm running Octoprint/Octopi so I switched to S3D controlled through USB. Same behavior. I haven't changed the S3d profile I'm using, but tried another one anyway. Same behavior. To answer willienewton's question, yes, S3D shows that the nozzle heat...

Started a print last night. This morning, I see that the printer quit extruding near the end of the print. The timelapse shows the print head moving normally, but no filament is extruding at the end. Plenty of filament available, so that's not it. Heat up the nozzle and extrude filament - everything...

Thanks so much for this!

Is it possible to change the order of the profiles listed in the profile drop down list? They appear to be listed in the order created, but I would like to group them by filament type.

ksevcik wrote:Look for inland petg from microcenter or Amazon. It's private labeled eSun.

Are all inland branded filaments actually esun? I periodically run into shortages on esun PLA s well.

Very cool!

Glad it's working!

Sorry, I didn't take any pictures. But, as it turns out, I found a site that shows exactly what I did. Part way down the following site, this guy did the same thing, and he took pics!

http://www.rcdon.com/html/makergear_m2_project1.html

OK, I think this is fixed :D While messing with this issue, I tried pinching the Y axis belt together with my fingers and moving the print bed forward and backwards and I felt a little play. Even though I had tightened the bolts for the bed and the piece that grabs the belt, there was still evidentl...