Wondering if anybody is up for trying a 2 part print. One piece needs to be rigid (ABS or PETG) and the other piece needs to be NinjaFlex. The parts assemble together.

Would be helpful to evaluate the output capabilities of the MakerGear M2 machine.

Thank you!

does this PETG have phthalates in it? read some nasty stuff about phthalates and how it's a endocrine disruptor... http://www.breastcancerfund.org/clear-science/radiation-chemicals-and-breast-cancer/phthalates.html So it doesn't smell and put toxic chemicals in the air while printing like ABS.. but ...

Im on the same quest for dual extrusion with multi materials as you, this opens up so many more options and in my opinion this will be one of the capabilities to really make this technology stand out. I posted a small multi-material test with files here...http://forum.makergear.com/viewtopic.php?f=2...

Wondering how this prints/feels in comparison to NinjaFlex?

Do you guys feel petg will replace abs?

That is a really neat looking frog model wow. Have you tried doing it with NinjaFlex and ABS/PLA?

and a really big THANK YOU in advance to anybody who gives this a try. As insta mentioned, the outcome of these trials will help us make a purchasing decision for at least one machine, maybe a couple

and here is the more advanced test.. this is an ABS base plate, connected to an round ABS wall, and the bubbles are Ninjaflex and these are stuck onto the ABS wall. included in the attached zip file are the STL's and a 3D PDF that shows the assembly and correct printing orientation. STL dimensions a...

Attached is the zip file. This model acts like a drinking cup holder with Ninjaflex bubbles, the wall of the Ninjaflex bubble is 1mm. The bubble diameter is around 1 inch or so. The bubbles are hollow inside so you can press them in with your finger and they should pop back out. This attached file i...

Insta, thank you so much!