Search found 57 matches
- Wed Mar 11, 2015 12:59 am
- Forum: Tech Support
- Topic: V4 extruding issue
- Replies: 19
- Views: 21703
V4 extruding issue
Hello, Just installed a V4... installed a new filament, extruded about 30-40mm and start printing, on the second layer it stopped extruding and extruder motor started grinding. I did rectract filament, cut it and feed it again, if i extract 10-20 mm it is ok, but when I click on extract 100mm or jus...
- Wed Mar 11, 2015 12:35 am
- Forum: Tech Support
- Topic: Clogged Hot-end
- Replies: 12
- Views: 14250
Clogged Hot-end
Hello everyone... I think if I get an answer we will stick this thread? I could not find info here easily, so mane threads and it's a mess. Ok I left my printer today for 13 hours print and when I came back I saw that printer is printing in the air and nothing extruding... pretty fast I figured out ...
- Fri Mar 06, 2015 8:12 pm
- Forum: How-to/Guides/Tips
- Topic: Extrusion calibration
- Replies: 68
- Views: 143180
Re: Extrusion calibration
Thank you!sthone wrote:https://www.youtube.com/watch?v=j0Cz6jPPECMnokianich wrote:how to calibrate z-height?
-Steve
- Fri Mar 06, 2015 8:11 pm
- Forum: Tech Support
- Topic: The Trials and Tribulations of my first ABS prints
- Replies: 18
- Views: 17802
Re: The Trials and Tribulations of my first ABS prints
yeah i am one of those that cant get glue stick to work. its more like a wax stick. not sure how it works with pla since i havent tried it with that. kinda works ok for bridge nylon but everything eles i have tried to print on glue stick comes right off....most of the time mid print. i dont get it ...
- Fri Mar 06, 2015 8:05 pm
- Forum: How-to/Guides/Tips
- Topic: Extrusion calibration
- Replies: 68
- Views: 143180
Re: Extrusion calibration
how to calibrate z-height?
- Mon Mar 02, 2015 2:11 pm
- Forum: Filament
- Topic: Glowing filament
- Replies: 0
- Views: 4133
Glowing filament
Can anybody recommend a good green (blue) filament that glows brightly in the dark for a long time with green (blue)?
- Tue Feb 24, 2015 11:55 pm
- Forum: Tech Support
- Topic: Extruder temp issue
- Replies: 3
- Views: 5082
Re: Extruder temp issue
"Fix errors" is hotend thermistor came detached and the motherboard lost signal to it. Check all the wiring in that loom for loose connections or breaks. Checked all connection and wiring. Came back to 20° but when I turned on Hot-end heat temp jumped to 187 in couple seconds and back to 60, then a...
- Tue Feb 24, 2015 3:56 pm
- Forum: M2 Dual Extruder
- Topic: v4 Status
- Replies: 132
- Views: 149356
Re: v4 Status
How to buy V4? I can not find it on makergear.com in Hot-end section
- Tue Feb 24, 2015 2:34 pm
- Forum: Tech Support
- Topic: Extruder temp issue
- Replies: 3
- Views: 5082
Extruder temp issue
Hi, Left working printer overnight and when I woke up this morning I found out that printer head is all the way to the left, bed is lowered and my prints are not finished (mat be 30%). I have started a fresh print and when it was readu to move to the right to ooze print head didn't move and I saw a ...
- Tue Feb 24, 2015 2:30 am
- Forum: Tech Support
- Topic: M2 Extruder stepper motor not turning
- Replies: 23
- Views: 33320
Re: M2 Extruder stepper motor not turning
it didn't work at all but it was stupid move on my side, moved the printer to change a pool and cable from power supply unplugged connector to Rambo in half. Plugged it in back and everything works now. Thank you anyway for reply