Search found 203 matches
- Tue Apr 26, 2016 10:00 pm
- Forum: Getting Started
- Topic: some basic questions on settings and scripts
- Replies: 8
- Views: 11190
Re: some basic questions on settings and scripts
In the G-Code Tab of S3D is a Global Z-Offset slot - that is where the people who need to do that would do it. If you have the new Rev. E machine, you do not need to do that . How do I find out if I have a Rev. E machine? where do I find the exact specs of my machine? thanks again from this novice!
- Tue Apr 26, 2016 9:58 pm
- Forum: Getting Started
- Topic: some basic questions on settings and scripts
- Replies: 8
- Views: 11190
Re: some basic questions on settings and scripts
Hi, I have a few basic questions: A. I have a V4 makergear preassembled, bought about 1 month ago. How do I know which hot end I need? You need the V4 hotend. I am using S3D and find it to be great but daunting. I am trying to follow the forum's instructions on printing with PETG. B. How do I add s...
- Tue Apr 26, 2016 9:55 pm
- Forum: Getting Started
- Topic: Getting started 2 questions
- Replies: 16
- Views: 28090
Re: Getting started 2 questions
I generally put a filament retract in my ending GCode so it pulls 10mm of plastic out of the hotend. It's pretty straightforward, and lets you keep the plastic loaded while still allowing for you to manually tug it from the cold extruder later (since it's not cemented into the hotend). G92 E0 G1 E-1...
- Thu Apr 21, 2016 7:06 pm
- Forum: Getting Started
- Topic: some basic questions on settings and scripts
- Replies: 8
- Views: 11190
some basic questions on settings and scripts
Hi, I have a few basic questions: A. I have a V4 makergear preassembled, bought about 1 month ago. How do I know which hot end I need? I am using S3D and find it to be great but daunting. I am trying to follow the forum's instructions on printing with PETG. B. How do I add scripts to g code? C. For ...
- Wed Apr 20, 2016 3:15 pm
- Forum: Getting Started
- Topic: trouble getting quality print
- Replies: 4
- Views: 8554
Re: trouble getting quality print
can anyone give me the best settings for PLA on PEI on fine print mode?
Also ABS and PETG?
thanks
Also ABS and PETG?
thanks
- Wed Apr 20, 2016 3:14 pm
- Forum: Getting Started
- Topic: trouble getting quality print
- Replies: 4
- Views: 8554
Re: trouble getting quality print
thanks Jules,
I have lowered the hotted and its much better,
I will have to get 1000 grit sandpaper and try, but for now it printed well.
I have lowered the hotted and its much better,
I will have to get 1000 grit sandpaper and try, but for now it printed well.
- Tue Apr 19, 2016 9:15 pm
- Forum: Getting Started
- Topic: trouble getting quality print
- Replies: 4
- Views: 8554
trouble getting quality print
Hello, I was having much trouble getting a quality print, many times corners or parts would peel up and later get hit with the hot end when passing over. I tried different solutions (glue stick, hairspray) and now have just installed a PEI sheet on the glass bed. I relaunched expecting a huge improv...
- Fri Mar 11, 2016 12:49 am
- Forum: Getting Started
- Topic: computer crashes
- Replies: 11
- Views: 21453
Re: computer crashes
thanks everyone for your great opinions, wasn't sure if it could have been a short through the USB cable, honestly its been years since I have see a whole computer crash. For the last number of years Mac made it so crashes were only apps that get blocked and you can manually restart the application....
- Fri Mar 11, 2016 12:46 am
- Forum: Getting Started
- Topic: Getting started 2 questions
- Replies: 16
- Views: 28090
Re: Getting started 2 questions
Hello Insta, regarding your retract code, where do I add this and how? If I look at my end script from within simplify3d it says: M104 S0 ; turn off extruder M140 S0 ; turn off bed G91 ; relative mode G1 Z10 ; lift 10mm G90 ; absolute mode G28 X0 ; home X axis M84 ; disable motors where would I inse...
- Wed Mar 09, 2016 4:31 am
- Forum: Getting Started
- Topic: Getting started 2 questions
- Replies: 16
- Views: 28090
Re: Getting started 2 questions
thanks again Insta,
but is the Viki the same as the LCD display that MakerGear sells? or different?
How are they different if so?
Which is better?
Which is easy to learn and intuitive?
thanks
but is the Viki the same as the LCD display that MakerGear sells? or different?
How are they different if so?
Which is better?
Which is easy to learn and intuitive?
thanks