Search found 98 matches
- Sun Sep 27, 2015 2:10 am
- Forum: Tech Support
- Topic: Wire/Power connector broken, any thing I can do?
- Replies: 7
- Views: 6633
Re: Wire/Power connector broken, any thing I can do?
ok looks like it is a 43645-0200, but anyone know what crimp terminal size I need?
- Sun Sep 27, 2015 1:12 am
- Forum: Tech Support
- Topic: Wire/Power connector broken, any thing I can do?
- Replies: 7
- Views: 6633
Re: Wire/Power connector broken, any thing I can do?
If someone could just tell me what kind of connector that would be great!
- Sat Sep 26, 2015 11:20 pm
- Forum: Tech Support
- Topic: Wire/Power connector broken, any thing I can do?
- Replies: 7
- Views: 6633
Wire/Power connector broken, any thing I can do?
OK, so I purchased a new nozzle; changed out with no issues. Noticed on my first test print, filament was leaking from the top of the nozzle, from between the barrel. Guess I didnt tighten it enough, no big deal. So I go to disconnect the hot end from the machine and boom, power connector disconnect...
- Sat Sep 26, 2015 6:38 pm
- Forum: How-to/Guides/Tips
- Topic: New Nozzle Settings
- Replies: 3
- Views: 6773
New Nozzle Settings
I purchase a .5mm Nozzle to replace my .35mm nozzle
Other than changing the nozzle dia in simplify 3d, are there any other settings I should adjust for the larger nozzle output?
Also, what is a decent layer height, that combines looking ok with faster print time speeds?
Thanks!
Other than changing the nozzle dia in simplify 3d, are there any other settings I should adjust for the larger nozzle output?
Also, what is a decent layer height, that combines looking ok with faster print time speeds?
Thanks!
- Mon Sep 21, 2015 1:12 am
- Forum: Modifications
- Topic: Changing a M2 from 1.75 to 3.0 mm Filament
- Replies: 29
- Views: 37072
Re: Changing a M2 from 1.75 to 3.0 mm Filament
Are there any advantages or disadvantages to using 3mm filament?
- Sun Sep 20, 2015 10:54 pm
- Forum: How-to/Guides/Tips
- Topic: Lowering acceleration/Better looking corners>?
- Replies: 3
- Views: 8283
Re: Lowering acceleration/Better looking corners>?
Great thread!
So where do I add that gcode?
So where do I add that gcode?
- Sat Sep 19, 2015 11:35 pm
- Forum: Filament
- Topic: Filament tangling on spool?
- Replies: 14
- Views: 25251
Re: Filament tangling on spool?
This community truly rocks!
I tried unspooling like the video said, and seems to have worked great!
Also started using binder clips on all my rolls!
No tangles yet; think I am going to try to new spool thing Jules recommended as well!
Thanks again for all the help, huge saver for me!
I tried unspooling like the video said, and seems to have worked great!
Also started using binder clips on all my rolls!
No tangles yet; think I am going to try to new spool thing Jules recommended as well!
Thanks again for all the help, huge saver for me!
- Sat Sep 19, 2015 11:32 pm
- Forum: How-to/Guides/Tips
- Topic: Lowering acceleration/Better looking corners>?
- Replies: 3
- Views: 8283
Lowering acceleration/Better looking corners>?
I need to make a bunch of parts fast; got mine working pretty good a 100mm/s with PLA But I noticed at the corners, they look a little rough I remember reading about tuning acceleration to help this, but for the life of me cannot find the thread! I am using Simplify3d; how can I keep the speed high ...
- Sat Sep 19, 2015 4:48 pm
- Forum: Filament
- Topic: Print Settings for PETG: eSUN Solid Black Filament
- Replies: 183
- Views: 1101639
Re: Print Settings for PETG: eSUN Solid Black Filament
I plan on getting a larger nozzle (.5 probably) Will this be ok for PEtg?
Also, I saw some of you talking about .6 nozzles; where do you get those?
Also, I saw some of you talking about .6 nozzles; where do you get those?
- Mon Sep 14, 2015 12:51 am
- Forum: Filament
- Topic: Filament tangling on spool?
- Replies: 14
- Views: 25251
Re: Filament tangling on spool?
I would agree that it was my fault, but I never even took the white off; it was the first spool i put on, git a few prints, set it up over night and came down to a tangled spool; actually same thing happened to my green spool (generic brand) tangled on 2nd or third print, before I took it off! I wil...