Search found 195 matches
- Thu Sep 22, 2016 5:30 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
Well I started with the width calibration originally, then did the height....but was getting the odd results. As it turns out my old settings seem to work. So I'm not sure if it was a ghost in the machine or something...Nothing had changed in the setup...but since this all happened I cleaned the noz...
- Thu Sep 22, 2016 4:56 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
I had an old profile and that seems to be working better...extrusion multiplier was at .85 and the filament diameter is 1.74....This seems to be working at the moment so hopefully ill get a clean print...
- Thu Sep 22, 2016 4:41 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
I checked the filament drive and that was clean.
I'm thinking it's still the settings...not sure what to tweak...
I'm thinking it's still the settings...not sure what to tweak...
- Thu Sep 22, 2016 4:22 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
The cleaning filament didn't help...the issue with the dots is that they do not stick an then get pulled up....
I'll try the filament drive next..
I'll try the filament drive next..
- Thu Sep 22, 2016 4:12 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
So do you simply take it apart? I haven't removed it.
I did just run allot of filament cleaner through the nozzle and am about to print again to see if that helps.
Thanks
I did just run allot of filament cleaner through the nozzle and am about to print again to see if that helps.
Thanks
- Thu Sep 22, 2016 3:55 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
So that worked for the overall calibration square but I noticed something odd...
I'm basically printing a rectangle, a base for a circuit board, and what I am getting on the initial outlines are dots vs a smooth line...hopefully the picture helps:
I'm basically printing a rectangle, a base for a circuit board, and what I am getting on the initial outlines are dots vs a smooth line...hopefully the picture helps:
- Thu Sep 22, 2016 2:01 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
That seemed to work much better!! Thank you!!!
- Thu Sep 22, 2016 1:06 am
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
What should I do to up the extrusion? I had calibrated with the square without the infill to .40mm
- Thu Sep 22, 2016 12:06 am
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
Top Solid Layers 3
Infill 100%
Infill 100%
- Wed Sep 21, 2016 10:39 pm
- Forum: Tech Support
- Topic: Not getting smooth top in calibration square
- Replies: 26
- Views: 23196
Re: Not getting smooth top in calibration square
My settings:
PETG
Filament Dia 1.87
Ext Multi: .70
Extr Width Manual: .40
PETG
Filament Dia 1.87
Ext Multi: .70
Extr Width Manual: .40