Search found 23 matches

by Mazhdulin
Wed Jan 10, 2018 5:13 pm
Forum: Software
Topic: stringing with the standard settings
Replies: 2
Views: 7246

stringing with the standard settings

Hi all, I performed the CTRLV V3 test for the M3ID and the issue I encountered most is stringing, Now I know I should fiddle with the retraction settings, but as I'm really new I don't know how much or which settings. I'm using al the basic settings and PLA from makergear. 0.1mm layers. speed 50mm/s...
by Mazhdulin
Mon Jan 08, 2018 12:56 pm
Forum: M3-ID
Topic: How do I print a circular part?
Replies: 11
Views: 17958

Re: How do I print a circular part?

do you have a foto of the printed part, and the STL file?
by Mazhdulin
Sun Jan 07, 2018 9:54 pm
Forum: M3-ID
Topic: thoughts on new M3 I dual
Replies: 12
Views: 22633

Re: thoughts on new M3 I dual

I have it now for a few weeks and am really happy with the Kruger. The only weakness I can spot is the fan located at the below the build plate, I had some poly support falling down. If a little piece gets in the fan it would ruin it I think. 20180105_144152.jpg I think I'm going to put some kind of...
by Mazhdulin
Sun Jan 07, 2018 9:40 pm
Forum: Software
Topic: simplify3d M3 ID polysupport profile error
Replies: 4
Views: 8885

Re: simplify3d M3 ID polysupport profile error

I fixed the adherence issues by cleaning the bed with acetone.
But it is still leaking a lot of polysupport.
20180105_144155.jpg
Oozing
20180105_144205.jpg
Lot of debris
Anyone changed the settings for this profile to something working.
by Mazhdulin
Sun Jan 07, 2018 9:32 pm
Forum: Tech Support
Topic: M3 ID bed adherence issues
Replies: 2
Views: 4556

Re: M3 ID bed adherence issues

Hi I fixed it by cleaning the bed with acetone.
Everything is sticking like crazy again.

Thanks for the reply
by Mazhdulin
Tue Jan 02, 2018 12:01 pm
Forum: Tech Support
Topic: M3 ID bed adherence issues
Replies: 2
Views: 4556

M3 ID bed adherence issues

I have some issue with bed adherrence, i'm using everything out of the box also the makergear fff files. But when I print a brim it warps and does not adhere, not with polysupport or normal PLA, when i print or supports sometimes after a while they let go of the plate. So far no issues with the 3d m...
by Mazhdulin
Mon Jan 01, 2018 11:10 pm
Forum: Software
Topic: simplify3d M3 ID polysupport profile error
Replies: 4
Views: 8885

Re: simplify3d M3 ID polysupport profile error

I tried multiple prints with this profile, but the brim it is printing is simply not adhering, with this settings, not with the polysupport but also not with the standard PLA
by Mazhdulin
Mon Jan 01, 2018 6:38 pm
Forum: Software
Topic: simplify3d M3 ID polysupport profile error
Replies: 4
Views: 8885

Re: simplify3d M3 ID polysupport profile error

I also think the temperature seetings of this profile are off, polysupport at 225 is not adhering to the bed. or am i doing something wrong? the PLA temp is set to 200 which is also a tad low right?
by Mazhdulin
Mon Jan 01, 2018 6:21 pm
Forum: Software
Topic: simplify3d M3 ID polysupport profile error
Replies: 4
Views: 8885

simplify3d M3 ID polysupport profile error

Hi all, Just tried the Polysupport profile for simplify3d for the first time but i got an error: the chosen infill layer interval has resulted in an infill width / height ratio below 1.2 I have found some solutions online, but as these are the standard profiles, do I just need to ignore the error? K...
by Mazhdulin
Fri Dec 01, 2017 11:10 pm
Forum: M3-ID
Topic: Enclosure or not
Replies: 4
Views: 10252

Enclosure or not

I have finally ordered the M3-ID, just waiting for it to arrive. Now on to the next point, do you guys have an enclosure for your printer? There are some points I want to tackle using an enclosure: 1. The printer is in a cold area of the house (15 degree celcius 59 fahrenheit), So an enclore with a ...