If you wouldn't mind could you send me over the scripts you used or the print profiles. Also do you still print this way or what processes do you currently run?

I installed the dual extruder setup in my rev e printer and have had no success with doing prints. I'm using Jules simplify3d profiles for pla but I'm having way to much oozing. I have increased retraction amounts, lowered temperatures, and increased airflow. No matter what I do I can't get the seco...

If you received a rev e machine the bed won't automatically drop. You will need to add the gcode to do this. The rev d and e run a different z stepper motor with a lower pitch thread on it. That is why it doesn't drop anymore.

Here is my start script. M108 S255 ; turn on M2 fans G28 ; home all axes G1 Y50 Z0.3 F9600 ; move forward to avoid binder clips G1 X205 Z10 ; move off platform G1 Z0.4 ; position nozzle G92 E0 ; zero extruder G1 E25 F225 ; purge nozzle G92 E0 ; zero extruder G1 X190 Z0.1 E1.0 F1200 ; slow wipe G1 X1...

Is MakerGear planning on releasing a Rev D to E Upgrade? I realize this would require the user to replace the firmware on Rambo for relocating the z end stop and reversing the z motor direction. Is this something that is in the works?

Wow pretty harsh but I can honestly say it is a different machine every time I sell one.

I'm back.... I always said I would like to build one from scratch. When do you anticipate the kits to go up on the website?

Yeah. I have some 12v supplies. But I want to verify the v3a is in good working order before using it. Just measured it and I'm at 2.4 ohms. I'm guessing it is bad?

Can anyone share what the stock resistance is for the v3a hotend? I'm not having much luck finding it. Thanks

lol yeah it was a shocking experience.... Just glad I have it fixed now. I have no idea how I didn't locate it before. I had 2 other printers plugged into the same outlet and never experienced the problem before.