Just do not try to clear a clog with a torch, since it is, (presumably), heat treated.
Although, looking at the web site, the coating can supposedly take up to 1800C.

I intermittently belong to a local 'maker space' that has three laser engravers/cutters, ($35/month). They are large, powerful, and accurate. (40-60 Watts, 24"x36"). It was a mild PITA to go to the class to learn how to use the machines, but it is well worth having professional-quality equipment ava...

sthone wrote:

aerodan wrote:It's stainless steel, which should be... no?

Nope other way around.. stainless is not magnetic.

It depends; some is, some is not. Some can be cold-worked to make it magnetic.

I have been trying to build aircraft switch covers for a while now. I found trying to print lettering just does not look good enough, however, a laser engraver does a great job. That still leaves the problem of contrasting color in the lettering. I made some that look great by painting a cover made ...

Has anyone tried any of the new Dupont filaments? They seem to have some really good characteristics: http://www.dupont.com/products-and-serv ... ty_2017_10

I have had good luck with these guys: https://www.makergeeks.com/collections/ ... series-pla
Their price cannot be beat.

I forgot to add one important step, when you set the toolhead offsets, Click the button to the left titled, "Apply toolhead offsets to G-code coordinates".

If you are using S3D, go to the G-code tab and the Toolhead Offsets drop-down menu. Measure how far off your black is from the white and input those x-y numbers on Tool 1. It looks as if you will need several 0.010". It may take a few tries to get it perfect, but it can be done. Some people may even...

This stuff is pretty good. It might be slightly stiffer and tougher than Ninjaflex and is definitely less expensive.
https://www.makergeeks.com/collections/ ... eplacement

I am also on MakeXYZ, but have only received 1-2 orders. I had had several people send pictures of a device asking if I could make it. I always asked if they had an STL file, and said if not, it would cost about $100 to create one. I never heard back from any of them. Does anyone have any recommenda...