Search found 594 matches
- Thu Aug 09, 2018 2:28 am
- Forum: Modifications
- Topic: nema17 dampers
- Replies: 160
- Views: 302243
Re: nema17 dampers
well then no dampers or heat sinks. One of the support guys that emailed me order the dampers for his machine to try them. I had meant to run some cylinder prints before and after to see how much more the affect the print quality and forgot.. He said he would try and report what he finds.. some peop...
- Wed Aug 08, 2018 4:05 pm
- Forum: Modifications
- Topic: nema17 dampers
- Replies: 160
- Views: 302243
Re: nema17 dampers
From Tech support the data sheet on the stepper http://www.kysanelectronics.com/Product ... ordID=8368
Max temp 110C
Max temp 110C
- Wed Aug 08, 2018 2:22 am
- Forum: Tech Support
- Topic: STL of Linear Rail??
- Replies: 3
- Views: 5062
Re: STL of Linear Rail??
Thanks Tim, but I think this will be fine. Got the dampers on the motors and wow it is quiet but still going to replace the bearing on the X axis this weekend as it is much rougher than this new one I slid on the rail when I had the motor and belt off..
- Wed Aug 08, 2018 1:27 am
- Forum: Modifications
- Topic: nema17 dampers
- Replies: 160
- Views: 302243
Re: nema17 dampers
I sent a mail to support to get the operating temperature range of the steppers. I have been printing for a few hours with pla and and external fan over the build platform in a semi-enclosed enclosure (top and 2 sides open and motors are around 120F, room temp is about is 82F. With the enclosure clo...
- Tue Aug 07, 2018 3:40 am
- Forum: Modifications
- Topic: nema17 dampers
- Replies: 160
- Views: 302243
Re: nema17 dampers
Yes, I did notice that the motor was HOT and I figured as that was why.. However these motors are rated at a very high temperature so I will enjoy the quiet for now. Others have posted they had them installed on multiple machines running production level stuff for a year and only removed them due to...
- Mon Aug 06, 2018 11:17 pm
- Forum: Modifications
- Topic: nema17 dampers
- Replies: 160
- Views: 302243
Re: nema17 dampers
Just installed the dampers and omg I can now hear the bad X axis bearing! When I was at the RepRap festival in June and saw what looked like cheapo printers running and heard no noise I was like,, hum.. wonder why the m2 sings a song.. Dampers! So I installed one of the washers from the 2 unused scr...
- Sun Aug 05, 2018 12:06 am
- Forum: Tech Support
- Topic: STL of Linear Rail??
- Replies: 3
- Views: 5062
Re: STL of Linear Rail??
Rolled my own
- Sat Aug 04, 2018 7:48 pm
- Forum: Tech Support
- Topic: STL of Linear Rail??
- Replies: 3
- Views: 5062
STL of Linear Rail??
MG support sent me a bearing cartridge to replace the Y cartridge that seems to be making an odd noise. However, I don't want to pull the old one off and have all the bearings go a bouncing, just in case there is actually nothing wrong with it. Before I attempt to measure and model a copy of the pla...
- Thu Aug 02, 2018 9:49 pm
- Forum: Software
- Topic: Extruder calibration and fill problem
- Replies: 13
- Views: 20669
Re: Extruder calibration and fill problem
I know I posted it for someone playing with PETG.. Did I give you a link to a factory file with a model for an item I print in eSun PETG on my M2? This would give you all of my setting and the model.. if filament diameter is correct it should print perfectly.. assuming .35 nozzle is installed I woul...
- Thu Aug 02, 2018 8:38 pm
- Forum: Software
- Topic: Extruder calibration and fill problem
- Replies: 13
- Views: 20669
Re: Extruder calibration and fill problem
Your starting hight is still off by .06 too high Should measure 2.0 +- .02 I like mine to be 1.98 > 2.01. Of course assuming accurate caliper. What printer is this anyway? What slicer What Filament and have you pulled out a couple or yards and measured the diameter in multiple places to make sure it...