thanks
It is on the other side (the Rambo side ) . I think I have a problem with the interface board . I tried to connect it in the 2 posibble ways . With no success in getting the reader to work. Does any has the electronic scheme of this board ??

Hi
I by mistake disconnect the cable from board . I have a cable with 6 color wires . try to find in manuals the right way to plug the cable .
it will be nice to have how to connect on the other side to the reader connector
Regards Doron

Hi guys
I got my baby (M2 ) second hand from eBay . Does the machine need any maintenance ( like oiling the motors ) except cleaning the debris ,from what I found there is need to grease the z steed rod from time to time . Any thing else ??
Regards Doron

thanks

Hi guys
can some one tell me what is the differences between these 2 extrudes and if it good idea to buy the v4 even I have working v2 I mean the single head extrude ?'
I have a 24v M2 printer
Doron

Hi guys I use only PLA and the difficult problem I found is hoe to connect parts after print . I try 2 second Loctite super glue and gel . The gel work but it took long time to get dry , Someone in Israel told me about the idea described in article ( link is attached ) ,I tried the friction W weldin...

The problem is the support separation layer . When I changed the number of layers to zero the wires there are much less but there is a problem to remove the support . So I will stay with the wires and do some hand work to move them
Thanks for hhelp

Hi
I print with support. The wires are mostly under the support ( I see it when I remove the support )

Hi
by mistake post the wrong picture

Hi guys
In my last prints for some reason i get in my prints a layer of wires in some places . I use PLA Hatchbox 1.75 at 200 Cel. degrees
the roll I use is new from package I attach pictures of part with wires
Thanks for help