The place to discuss your hardware and software/firmware modifications...
-
makeal
- Posts: 69
- Joined: Sat Aug 25, 2018 2:13 pm
Post
by makeal » Wed Oct 10, 2018 8:52 pm
Just finished my first mod. Made my M2 RevE into M3 lite
Used sthone's M3 cooler.
pi 3b+ powered via POE and 12" usb cable to connect the printer. Running Octoprint
Pi camera V2 mounted to the bed corner. Friend of mine modded the arm for me to clear new fan and bring it a bit higher.
Pi case looks similar to m3 one
M3 cooler and pi camera mounts
another angle
Pi camera view
-
Tim
- Posts: 1205
- Joined: Thu Apr 10, 2014 2:19 pm
- Location: Poolesville, Maryland
-
Contact:
Post
by Tim » Tue Oct 16, 2018 3:08 am
Since nobody else has responded, let me be the first to say that your mod looks great! Now all (!) you need to do is to add the touch probe. . .
-
makeal
- Posts: 69
- Joined: Sat Aug 25, 2018 2:13 pm
Post
by makeal » Tue Oct 16, 2018 3:18 am
Tim wrote: ↑Tue Oct 16, 2018 3:08 am
Since nobody else has responded, let me be the first to say that your mod looks great! Now all (!) you need to do is to add the touch probe. . .
Thank you
Yes touch probe is on my list. Trying to find details for revE but haven’t found it yet