M3 Lite

The place to discuss your hardware and software/firmware modifications...
Post Reply
makeal
Posts: 77
Joined: Sat Aug 25, 2018 2:13 pm

M3 Lite

Post by makeal » Wed Oct 10, 2018 8:52 pm

Just finished my first mod. Made my M2 RevE into M3 lite
Used sthone's M3 cooler.
pi 3b+ powered via POE and 12" usb cable to connect the printer. Running Octoprint
Pi camera V2 mounted to the bed corner. Friend of mine modded the arm for me to clear new fan and bring it a bit higher.

Pi case looks similar to m3 one :)
Screenshot 2018-10-10 15.47.37.png
M3 cooler and pi camera mounts
Screenshot 2018-10-10 15.47.53.png
another angle
Screenshot 2018-10-10 15.48.02.png
Pi camera view
Screenshot 2018-10-10 15.48.11.png

User avatar
Tim
Posts: 1205
Joined: Thu Apr 10, 2014 2:19 pm
Location: Poolesville, Maryland
Contact:

Re: M3 Lite

Post by Tim » Tue Oct 16, 2018 3:08 am

Since nobody else has responded, let me be the first to say that your mod looks great! Now all (!) you need to do is to add the touch probe. . .

makeal
Posts: 77
Joined: Sat Aug 25, 2018 2:13 pm

Re: M3 Lite

Post by makeal » Tue Oct 16, 2018 3:18 am

Tim wrote:
Tue Oct 16, 2018 3:08 am
Since nobody else has responded, let me be the first to say that your mod looks great! Now all (!) you need to do is to add the touch probe. . .
Thank you
Yes touch probe is on my list. Trying to find details for revE but haven’t found it yet

Post Reply