Micron All Metal Extruder Upgrade

The place to discuss your hardware and software/firmware modifications...
Post Reply
User avatar
innkeeper
Posts: 266
Joined: Fri Jun 26, 2015 3:56 am
Location: New Windsor, NY

Re: Micron All Metal Extruder Upgrade

Post by innkeeper » Fri Oct 30, 2015 11:16 pm

Sorry i have been remiss in posting... i did receive the insert but haven't had the time to fit it. ... hopefully this weekend. I'll post the results :)
M2 - MKS SBase w Smoothieware, GLCD, 24v, Upg Z & extruder stepper - IR bed leveling, Astrosyn dampers X/Y/Z, MIC 6, Zebra, PEI, & glass Build Plates - E3D, V3B Hotends, & more - many other 3d printers - production printing.
Top
User avatar
sthone
Posts: 897
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:
Contact sthone

Re: Micron All Metal Extruder Upgrade

Post by sthone » Tue Nov 03, 2015 8:09 pm

No worries, glad it showed up though. I made a new one for mine too but haven't found the time to test it out either... to many projects not enough time. :?

-Steve
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
Top
teltekus
Posts: 7
Joined: Fri Jun 19, 2015 8:51 am

Re: Micron All Metal Extruder Upgrade

Post by teltekus » Fri Jan 22, 2016 11:04 pm

Do you have a layout of the plate? I will lay it out and cut one on my Laser.
Top
User avatar
sthone
Posts: 897
Joined: Tue Jul 08, 2014 8:25 pm
Location: Connecticut
Contact:
Contact sthone

Re: Micron All Metal Extruder Upgrade

Post by sthone » Sat Jan 23, 2016 1:42 am

The demensions are listed in the drawing I posted a few pages back. I probably have a solid work file but I'm on vacation for the weekend so I do not have access to the file right now.
____________________________________________________
See my projects at https://www.theneverendingprojectslist.com
Top
Post Reply

Return to “Modifications”